Clear, Fast Sight Picture In All Light Conditions; Low-Profile, No-Snag Shape
Low-profile, fixed sights for Taurus 1911 have Tritium inserts that glow in low light, so you can see the sights clearly under all conditions. Same height as original factory sights, and cut for drop-in fit to factory dovetails—no machining of slide required. Front sight has one dot. X-Model design with sloping top surface, rounded corners, and beveled edges that won’t snag on clothing or holster—perfect for concealed-carry or tactical use. Purchase rear sight (sold separatly) to give your pistol an advanced three-dot night sight system or mix with other Novak sights to create a sight system customized to your shooting needs.
SPECS: Machined steel, matte black finish, with Tritium inserts. Fits Taurus 1911 pistols; minor fitting may be needed. Front - .610” (1.5cm) long, .125” (3.2mm) wide, .150” (3.8mm) high.
Mer...
Klart, raskt siktebilde i alle lysforhold; Lavprofil, ingen-snag form
Lavprofilerte, faste sikter for Taurus 1911 har Tritium-innlegg som lyser i svakt lys, slik at du kan se siktebildet klart under alle forhold. Samme høyde som originale fabrikksikter, og skåret for drop-in passform til fabrikkens dovetails—ingen bearbeiding av sliden nødvendig. Frontsiktet har ett punkt. X-Model-design med skrånende overflate, avrundede hjørner og avfasede kanter som ikke vil hekte seg fast i klær eller hylster—perfekt for skjult bæring eller taktisk bruk. Kjøp baksikte (selges separat) for å gi pistolen din et avansert tre-punkts nattsiktesystem eller kombiner med andre Novak-sikter for å skape et siktesystem tilpasset dine skytebehov.
SPECS: Maskinert stål, matt svart finish, med Tritium-innlegg. Passer til Taurus 1911 pistoler; mindre tilpasning kan være nødvendig. Front - .610” (1,5cm) lang, .125” (3,2mm) bred, .150” (3,8mm) høy.
Mer...
Kundevurderinger for NOVAK TRITIUM FRONT SIGHT FOR TAURUS 1911
Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4
Front sight KIND OF fits(02.07.2010)
For these dovetails to be cut to factory specs they sure took a lot of modification just to work on my taurus PT1911ALR.
Big Difference(01.04.2011)
Much easier to focus on front sight. Not a drop in, but just minor fitting to install. Like it so much, will be ordering rear sight soon.
Excellent(12.06.2011)
Installed without any fitting needed on my gun.
Corrected Shooting low at 25 yards.
Good sight, but not perfect.(29.06.2014)
I had this installed on a PT 1911. It is the right height and shoots where I want it to. It took some work to make it fit the dovetail on my particular gun. The only issue for me is that it doesn't seem exceptionally bright. I don't know how old the tritium is in it, but it was a new sight.
It gives a decent sight picture with the white dot and tritium insert when using in less-than-perfect light. But if you transition from a brightly lit room into an almost-dark one, it can be hard to pick up. In the middle of the night, when your eyes have gotten used to darkness, maybe it wouldn't seem so dim. The night sights I have on my Glocks look like beacons, though, after working with this on my Taurus. If it was as bright as it should be, I would give it five stars. I don't know if that was just the one that I got, or is an issue with all of them. I wanted a tritium sight on there so I could see it in a life-or-death situation, no ifs, ands or buts. And I don't think it's quite what it could and should be.
Beautiful, Butt Requires Patience.(10.07.2017)
This was a very good sight, but take heed it is was not a drop in fit on My version of a Taurus PT-1911.. Using my Military Armors tools took me almost 3 hours of sanding and fitting to get sight to fit in Dove Tail of my PT-1911. The only other item was the Novak sight was 0.024 Longer than the front of my slide. I choose not to change any specifics of my firearm only the sight. This required 1mm reduction of the front an rear 65 degree dove cuts as well as .05 height. End result I need a Brass Punch and Side Cutters to drift left or right, Locke-Tight today and range tomorrow. Patience to Install is a must.
Produktnr.: 662000093 NOVAK TRITIUM FRONT SIGHT FOR TAURUS 1911 Produsentnr.: DFTI9116150 Lavprofilerte, faste sikter for Taurus 1911 har Tritium-innlegg som lyser i svakt lys, slik at du kan se siktebildet klart under alle forhold. Samme høyde som originale fabrikksikter, og skåret for drop-in passform til fabrikkens dovetails—ingen bearbeiding av sliden nødvendig. Frontsiktet har ett punkt. X-Model-design med skrånende overflate, avrundede hjørner og avfasede kanter som ikke vil hekte seg fast i klær eller hylster—perfekt for skjult bæring eller taktisk bruk. Kjøp baksikte (selges separat) for å gi pistolen din et avansert tre-punkts nattsiktesystem eller kombiner med andre Novak-sikter for å skape et siktesystem tilpasset dine skytebehov.
Clear, Fast Sight Picture In All Light Conditions; Low-Profile, No-Snag Shape
Low-profile, fixed sights for Taurus 1911 have Tritium inserts that glow in low light, so you can see the sights clearly under all conditions. Same height as original factory sights, and cut for drop-in fit to factory dovetails—no machining of slide required. Front sight has one dot. X-Model design with sloping top surface, rounded corners, and beveled edges that won’t snag on clothing or holster—perfect for concealed-carry or tactical use. Purchase rear sight (sold separatly) to give your pistol an advanced three-dot night sight system or mix with other Novak sights to create a sight system customized to your shooting needs.
SPECS: Machined steel, matte black finish, with Tritium inserts. Fits Taurus 1911 pistols; minor fitting may be needed. Front - .610” (1.5cm) long, .125” (3.2mm) wide, .150” (3.8mm) high.
Mer...
Klart, raskt siktebilde i alle lysforhold; Lavprofil, ingen-snag form
Lavprofilerte, faste sikter for Taurus 1911 har Tritium-innlegg som lyser i svakt lys, slik at du kan se siktebildet klart under alle forhold. Samme høyde som originale fabrikksikter, og skåret for drop-in passform til fabrikkens dovetails—ingen bearbeiding av sliden nødvendig. Frontsiktet har ett punkt. X-Model-design med skrånende overflate, avrundede hjørner og avfasede kanter som ikke vil hekte seg fast i klær eller hylster—perfekt for skjult bæring eller taktisk bruk. Kjøp baksikte (selges separat) for å gi pistolen din et avansert tre-punkts nattsiktesystem eller kombiner med andre Novak-sikter for å skape et siktesystem tilpasset dine skytebehov.
SPECS: Maskinert stål, matt svart finish, med Tritium-innlegg. Passer til Taurus 1911 pistoler; mindre tilpasning kan være nødvendig. Front - .610” (1,5cm) lang, .125” (3,2mm) bred, .150” (3,8mm) høy.
Mer...
Kundevurderinger for NOVAK TRITIUM FRONT SIGHT FOR TAURUS 1911
Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4
Front sight KIND OF fits(02.07.2010)
For these dovetails to be cut to factory specs they sure took a lot of modification just to work on my taurus PT1911ALR.
Big Difference(01.04.2011)
Much easier to focus on front sight. Not a drop in, but just minor fitting to install. Like it so much, will be ordering rear sight soon.
Excellent(12.06.2011)
Installed without any fitting needed on my gun.
Corrected Shooting low at 25 yards.
Good sight, but not perfect.(29.06.2014)
I had this installed on a PT 1911. It is the right height and shoots where I want it to. It took some work to make it fit the dovetail on my particular gun. The only issue for me is that it doesn't seem exceptionally bright. I don't know how old the tritium is in it, but it was a new sight.
It gives a decent sight picture with the white dot and tritium insert when using in less-than-perfect light. But if you transition from a brightly lit room into an almost-dark one, it can be hard to pick up. In the middle of the night, when your eyes have gotten used to darkness, maybe it wouldn't seem so dim. The night sights I have on my Glocks look like beacons, though, after working with this on my Taurus. If it was as bright as it should be, I would give it five stars. I don't know if that was just the one that I got, or is an issue with all of them. I wanted a tritium sight on there so I could see it in a life-or-death situation, no ifs, ands or buts. And I don't think it's quite what it could and should be.
Beautiful, Butt Requires Patience.(10.07.2017)
This was a very good sight, but take heed it is was not a drop in fit on My version of a Taurus PT-1911.. Using my Military Armors tools took me almost 3 hours of sanding and fitting to get sight to fit in Dove Tail of my PT-1911. The only other item was the Novak sight was 0.024 Longer than the front of my slide. I choose not to change any specifics of my firearm only the sight. This required 1mm reduction of the front an rear 65 degree dove cuts as well as .05 height. End result I need a Brass Punch and Side Cutters to drift left or right, Locke-Tight today and range tomorrow. Patience to Install is a must.