Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

SINCLAIR INTERNATIONAL Sinclair O-Ring Rod Guide, Belted Mags 7mm - 30 cal


Auto-oversatt beskrivelse (Beskrivelse - Produsent): Våre guider for rengjøringsstang fra Centerfire er designet for å sette inn i handlingen i stedet for bolten eller boltholderen. De har en snute med silikon "O" -ring som settes inn i kammeret ditt, og tetter tønnen fra mottakeren. Mer...

050806111110 749002944
Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bolt or bolt carrier. They feature a snout with a silicone "O"-ring that inserts into your chamber, sealing the barrel off from the receiver. The "O"-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock "O"-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an "O"-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair "O"-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22,COOPER 16(WSSM), BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.
SINCLAIR INTERNATIONAL
289 289 1 NOK
749002944
7mm-30 Caliber Belted Mag O-Ring Rod Guide
Produsentnr.: 003695300 050806111110 Våre guider for rengjøringsstang fra Centerfire er designet for å sette inn i handlingen i stedet for bolten eller boltholderen. De har en snute med silikon "O" -ring som settes inn i kammeret ditt, og tetter tønnen fra mottakeren. "O" -ringen hindrer løsningsmidler i å lekke tilbake i tiltaksområdet og gni opp avtrekkerenheten. Vi har for øyeblikket lagerføringer av "O" -stangledere for over 1000 forskjellige action / patronkombinasjoner. Hver stangguide er maskinert for å passe til spesifikke handlinger og patronfamilier fra 0,17 til 0,338 kaliber. Dessverre låner ikke noen riflekamre seg til en "O" -ring stangguide, for disse patronene anbefaler vi en av våre justerbare kegle stangguider. I et forsøk på å bedre betjene rengjøringsbehovene til kundene våre, har vi oppgradert våre Sinclair "O" -ringstangguider til å omfatte integrerte løsningsmiddelporter. Denne oppgraderingen er nå inkludert i hver senterfyrboltstangguide og nesten alle AR-stangguider. Hvis du foretrekker en stangguide uten en integrert løsningsmiddelport, kan du kontakte oss via e-post eller telefon, og vi vil med glede gi deg en stangguide til din smak. Disse stangførerne uten løsemiddelporter vil bli behandlet som semi-tilpasset, så vær så snill å ta 2-4 uker til levering av stangguider uten løsemiddelporter. Det er ingen ekstra kostnad for stangføringer uten integrerte løsningsmiddelporter. Passer til følgende handlinger: Borden Rimrock, COOPER 54 & 22, COOPER 16 (WSSM), BRNO, Browning A-Bolt, CPS, Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000, HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (alle 700.600 & 7), Ruger Model 77 short and 77 long, S & W Model 1970, Savage 110, 112,11,12, Springfield 03A3, Stolle (alle), Tanner, Weatherby, Varmitmaster og Winchester (FN-produksjon før 2010). SPESIELLE MERKNAD: FN-versjoner av Model 70 har ikke alle .700 boltdiametere.De har også FASTE ejektorer, så en spalte må freses ned langs stangenes styrekropp. Så enhver modell 70 laget etter 2010 som har FN og ikke Winchester New Haven Connecticut stemplet på mottakeren, er nå en TILPASSET RODHÅNDBOK, og du må sjekke boltens diameter.
289 NOK 25 kr 289,00 *

10+ på lager
Spesifikasjoner: Action Fit: Bordon Rimrock, BRNO, Browning A-Bolt, Cooper 22, Cooper 54, Cooper Model 16, CPS, Dakota Arms, Enfield US M1917, GA Precision Templar, Grunig Elmiger, H-S Precision, Hart Actions, Herter Model V9, Husqvarna Model HVA & M8000, Mauser 3000, Stillar Viper Bolt Diameter: .695 Cartridge: 300 Winchester Magnum, 300 H&H Magnum, 300 Weatherby Magnum, 7 mm Remington Magnum, 308 Norma Mag, 7 mm Weatherby Magnum, 7 mm STW, 30-338 Winchester Mag, 300 Ruger Compact Magnum

Attributes

Action Fit: Bordon Rimrock,BRNO,Browning A-Bolt,Cooper 22,Cooper 54,Cooper Model 16,CPS,Dakota Arms,Enfield US M1917,GA Precision Templar,Grunig Elmiger,H-S Precision,Hart Actions,Herter Model V9,Husqvarna Model HVA & M8000,Mauser 3000,Stillar Viper Bolt Diameter: .695 Cartridge: 7 mm Remington Magnum,7 mm STW,7 mm Weatherby Magnum,300 H&H Magnum,300 Weatherby Magnum,300 Winchester Magnum,308 Norma Mag,300 Ruger Compact Magnum,30-338 Winchester Mag

Elementdetaljer

Made in USA




Our Centerfire Cleaning Rod Guides are designed to insert into your action In place of your bolt or bolt carrier. They feature a snout with a silicone "O"-ring that inserts into your chamber, sealing the barrel off from the receiver. The "O"-ring prevents solvents from leaking back into the action area and gumming up the trigger assembly. We currently stock "O"-ring rod guides for over 1000 different action/cartridge combinations. Each rod guide is machined to fit specific actions and cartridge families from .17 up to .338 caliber. Unfortunately some rifle chamberings do not lend themselves to an "O"-ring style rod guide, for these cartridges we recommend one of our Adjustable Cone Style Rod Guides. In an effort to better serve the cleaning needs of our customers, we have upgraded our Sinclair "O"-ring rod guides to include integral solvent ports. This upgrade is now included with every centerfire bolt action rod guide and nearly all AR style rod guides. If you prefer a rod guide without an integral solvent port, please contact us via e-mail or phone and we will happily provide you with a rod guide to your liking. These rod guides without solvent ports will be treated as semi-custom, so please allow 2-4 weeks for delivery of rod guides without solvent ports. There is no additional charge for rod guides without integral solvent ports. Will fit the following Actions: Borden Rimrock, COOPER 54 & 22,COOPER 16(WSSM), BRNO, Browning A-Bolt, CPS,Dakota Arms Model 76, GA Precision Templar, Stiller Viper, Enfield Model 1917, Grunig Elmiger, Hart, Herter Model V9, Husqvarna Model HVA & M8000,HS Precision, Mauser Model 3000, Mauser 38 Swedish Target, Mauser 98 type, McMillan Signature, Remington (all 700,600 &7), Ruger Model 77 short and 77 long, S & W Model 1970,  Savage 110, 112,11,12, Springfield 03A3, Stolle (all), Tanner, Weatherby, Varmitmaster, and Winchester (pre 2010 FN production). SPECIAL NOTE: FN versions of the Model 70 do not all have .700 bolt diameters. Also they have FIXED ejectors so a slot has to be milled down the length of the rod guide body. So any Model 70 made after 2010 that has FN and not Winchester New Haven Connecticut stamped on the receiver is now a CUSTOM ROD GUIDE and you have to check the bolt diameter.
På lager 1 på lager
kr 83,00 * kr 68,00 - kr 318,00*
På lager 10+ på lager
kr 361,00 * kr 332,00 - kr 487,00*
På lager 10+ på lager
kr 772,00 * kr 623,00 - kr 883,00*