Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
S&W 1911 ADJUSTABLE VORTEX VIPER/VENOM SIGHT MOUNT

841370116959 296000535
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.  
0 0 1 NOK
Produktnr.: 296000535
EGW S&W 1911 ADJUSTABLE VORTEX VIPER/VENOM SIGHT MOUNT
Produsentnr.: 49296 841370116959 Materiale: 7075 Aluminium Belegg: Matt svart hardcoat Total lengde: 1.811" Total bredde: .99" Monteringsutstyr: (2) 6-32 knappehodeskruer, (2) 6-32 flathodeskruer, (1) 6-32 sett skrue Rødpunktsikte-passform: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGWs rødpunktsikter er ment å installeres fra venstre mot høyre (med munningen vendt fremover). Skinnen har en progressiv taper for å tillate enklere installasjon. Bare fjern baksiktet på våpenet ditt og erstatt det med vår montering for å feste ditt Vortex Viper/Venom, Burris FastFire eller Docter rødpunktsikte. Ingen modifikasjoner er nødvendige. Du kan når som helst ta av vår montering og erstatte baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i skinnen Stram sett skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (plassering av et lite papirstykke mellom rødpunktsiktet og siktemonteringen vil gjøre fjerning enklere og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra monteringsskruene til med et moment på 15in/lbs 2 knappehodeskruer - Levert for Vortex Viper og Venom sikter 2 flathodeskruer - Levert for Burris FastFire og Docter sikter Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon.
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Farge: Black Make: Smith & Wesson Material: Aluminum Modell: 1911 Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: Smith & Wesson Material: Aluminum Modell: 1911 Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,041kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 127mm

Elementdetaljer

Made in USA




Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.  
Nyhetsbrev