Auto-oversatt beskrivelse (Beskrivelse - Produsent): CNC-maskinerte komponenter tillater en jevn, skarp avtrekker med et mye lettere trekk og mer presis frigjøring for bedre nøyaktighet og raske oppfølgingsbilder. Kutter sear førreisen med omtrent ¼ "for å bidra til å øke kontrollen og forhindre nøyaktighetsnedbrytende kryp. Mer...
CNC machined components allow a smooth, crisp trigger with a much lighter pull and more precise letoff for better accuracy and fast follow-up shots. Cuts sear pre-travel by about ¼" to help increase control and prevent accuracy-degrading creep. Kits include the reduced-travel sear with pre-polished face, heat-treated to Rc 45-50, plus trigger and sear springs, trigger bar, 10% reduced power striker spring and 15% extra power striker spring. Lightens trigger pull by approximately 1 to 1½ lbs.
SPECS: Steel, in-the-white. Includes: Sear, heat treated to Rc 45-50, trigger/sear springs, and trigger bar. Striker Springs - Steel, tempered, (1) 10% reduced power, (1) 15% extra power.
Mer...
For en jevn, klar utløsertrekk
CNC-maskinerte komponenter tillater en jevn, skarp avtrekker med et mye lettere trekk og mer presis frigjøring for bedre nøyaktighet og raske oppfølgingsbilder. Kutter sear førreisen med omtrent ¼ "for å bidra til å øke kontrollen og forhindre nøyaktighetsnedbrytende kryp. Sett inkluderer den reduserte reiseskjæren med forpolert ansikt, varmebehandlet til Rc 45-50, pluss trigger og sear fjærer, trigger bar , 10% redusert kraft spissfjær og 15% ekstra kraft spissfjær. Letter utløsertrekket med omtrent 1 til 1½ lbs.
SPECS: Stål, i hvitt. Inkluderer: Sear, varmebehandlet til Rc 45-50, trigger / sear fjærer, og trigger bar. Striker Springs - Stål, herdet, (1) 10% redusert kraft, (1) 15% ekstra kraft.
Mer...
Kundevurderinger for Fits XDM Standard & Sub-Compact, 9mm/.40 S&W
Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 3,6
Makes a great trigger.(03.11.2017)
I just installed one in my XDm OSP. Dropped the pull from 7lbs to 3.5lbs. Much shorter pull distance and nice short reset. The Springer video shows the disassembly well. Fitting is easy. Take it slow and it goes pretty well. I had installed on on an XD45 several years ago. It took about 2 hours of patient fitting, filing, fitting, testing, and some final polishing and everything works as planned. I'll use this kit again on other XD pistols I own.
Go With Powder Rvr(02.08.2018)
purchased to install in a XDm-5.2-9mm [NM-EIC Target, w/Barsto MT Barrel]. went to the website, watched the video as this is the first XD i've owned. the videos are very basic and give no detail how to make the trigger bar work properly. i installed everything else and then figured out how to take off enough material to get the t-bar into the frame. while the trigger was lighter and smoother it now had a lot of 'mush' at the break. due to the design of the bar, the bar radius makes contact with the frame radius and does NOT give a true over travel stop. further the trigger pull was still much longer than i liked. when i removed material from the sear, the 'over-travel' [such as it was] became useless. being no instructions are provided, you need to learn on your own what works or in what order to install this system. the only reason i can think of to not provide some instruction is either liability issues or they want you to spend the extra money for them to install it.
the PRP is a more well thought out over-travel trigger and comes with instructions. knowing what i know, now, i would NOT have purchased the Springer system.
Very good kit(19.08.2012)
Requires fitting of over-travel boss on trigger bar, but that is where the most improvement of trigger pull was for me. Other parts are drop-in.
50,000+ rounds in competition (03.11.2017)
I used this in my XD45 Tactical. Got the trigger pull down to 3.75 pounds from over 6 original. Fitting is relatively easy. Works great.
I like it so much I put another in a recently purchased XDm OSP.
Excellent Kit(14.11.2009)
Small amount of fitting requird on the trigger bar, but no more long trigger pull, about 50% less and much better break price is high for what it is but now i love my xd
Very disappointed!(04.03.2011)
I bought this trigger kit because it was the most expensive and so I expected the highest quality and best performance possible. My particular XD had far too much trigger travel, and the factory pull weight buried my trigger scale. After installation, the trigger travel was reduced by 1/16 inch, and the pull weight still buried the trigger scale. I contacted Springer Precision and explained my situation and asked if I could send it back and I was told NO. The owner of Powder River Precision heard my story and felt so bad he sent me his kit AT NO CHARGE! I have the Powder River Precision kit in this XD now, and the trigger pull is 1/8 TOTAL and the trigger pull weight is 5 lbs. Thank you Powder River.
Great kit!(28.10.2011)
The trigger bar broke after around 30k rounds on my girlfriends XD9. I installed this kit and holy smokes what a difference it makes! If your after a shorter, lighter trigger pull this is the kit for you.
NOTE: This kit does require fitting the trigger bar to make it work. If you don't know what this means look for the installation video's (youtube)and make sure you're up to the task before you lay down the cash!
defeats trigger safety(18.02.2017)
Bought the XD Subcompact as a defense pistol instead of the new single stack Glock since it had a grip safety in addition to trigger safety. Didn't like the heavy trigger pull and creep with this short barrel defense gun so I bought kit and had a gunsmith install. Great features: did reduce trigger pull. Did shorten creep. Bad feature: defeated trigger safety. If you are okay with that then it is a good product that does what it promises.
100005361 Fits XDM Standard & Sub-Compact, 9mm/.40 S&W Produsentnr.: SP0188 CNC-maskinerte komponenter tillater en jevn, skarp avtrekker med et mye lettere trekk og mer presis frigjøring for bedre nøyaktighet og raske oppfølgingsbilder. Kutter sear førreisen med omtrent ¼ "for å bidra til å øke kontrollen og forhindre nøyaktighetsnedbrytende kryp. Sett inkluderer den reduserte reiseskjæren med forpolert ansikt, varmebehandlet til Rc 45-50, pluss trigger og sear fjærer, trigger bar , 10% redusert kraft spissfjær og 15% ekstra kraft spissfjær. Letter utløsertrekket med omtrent 1 til 1½ lbs.
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
100003968 Fits XD Sub-Compact, 9mm/.357 Sig/.40 S&W Produsentnr.: BRN9MMKITSC CNC-maskinerte komponenter tillater en jevn, skarp avtrekker med et mye lettere trekk og mer presis frigjøring for bedre nøyaktighet og raske oppfølgingsbilder. Kutter sear førreisen med omtrent ¼ "for å bidra til å øke kontrollen og forhindre nøyaktighetsnedbrytende kryp. Sett inkluderer den reduserte reiseskjæren med forpolert ansikt, varmebehandlet til Rc 45-50, pluss trigger og sear fjærer, trigger bar , 10% redusert kraft spissfjær og 15% ekstra kraft spissfjær. Letter utløsertrekket med omtrent 1 til 1½ lbs.
Finish:
Unfinished
Make:
Springfield
Modell:
XD
Style:
Kit
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
100003967 Fits XD Standard, 9mm/.357 Sig/.40 S&W Produsentnr.: BRN9MMKIT CNC-maskinerte komponenter tillater en jevn, skarp avtrekker med et mye lettere trekk og mer presis frigjøring for bedre nøyaktighet og raske oppfølgingsbilder. Kutter sear førreisen med omtrent ¼ "for å bidra til å øke kontrollen og forhindre nøyaktighetsnedbrytende kryp. Sett inkluderer den reduserte reiseskjæren med forpolert ansikt, varmebehandlet til Rc 45-50, pluss trigger og sear fjærer, trigger bar , 10% redusert kraft spissfjær og 15% ekstra kraft spissfjær. Letter utløsertrekket med omtrent 1 til 1½ lbs.
Finish:
Unfinished
Make:
Springfield
Modell:
XD
Style:
Kit
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
CNC machined components allow a smooth, crisp trigger with a much lighter pull and more precise letoff for better accuracy and fast follow-up shots. Cuts sear pre-travel by about ¼" to help increase control and prevent accuracy-degrading creep. Kits include the reduced-travel sear with pre-polished face, heat-treated to Rc 45-50, plus trigger and sear springs, trigger bar, 10% reduced power striker spring and 15% extra power striker spring. Lightens trigger pull by approximately 1 to 1½ lbs.
SPECS: Steel, in-the-white. Includes: Sear, heat treated to Rc 45-50, trigger/sear springs, and trigger bar. Striker Springs - Steel, tempered, (1) 10% reduced power, (1) 15% extra power.
Mer...
For en jevn, klar utløsertrekk
CNC-maskinerte komponenter tillater en jevn, skarp avtrekker med et mye lettere trekk og mer presis frigjøring for bedre nøyaktighet og raske oppfølgingsbilder. Kutter sear førreisen med omtrent ¼ "for å bidra til å øke kontrollen og forhindre nøyaktighetsnedbrytende kryp. Sett inkluderer den reduserte reiseskjæren med forpolert ansikt, varmebehandlet til Rc 45-50, pluss trigger og sear fjærer, trigger bar , 10% redusert kraft spissfjær og 15% ekstra kraft spissfjær. Letter utløsertrekket med omtrent 1 til 1½ lbs.
SPECS: Stål, i hvitt. Inkluderer: Sear, varmebehandlet til Rc 45-50, trigger / sear fjærer, og trigger bar. Striker Springs - Stål, herdet, (1) 10% redusert kraft, (1) 15% ekstra kraft.
Mer...
Kundevurderinger for Fits XDM Standard & Sub-Compact, 9mm/.40 S&W
Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 3,6
Makes a great trigger.(03.11.2017)
I just installed one in my XDm OSP. Dropped the pull from 7lbs to 3.5lbs. Much shorter pull distance and nice short reset. The Springer video shows the disassembly well. Fitting is easy. Take it slow and it goes pretty well. I had installed on on an XD45 several years ago. It took about 2 hours of patient fitting, filing, fitting, testing, and some final polishing and everything works as planned. I'll use this kit again on other XD pistols I own.
Go With Powder Rvr(02.08.2018)
purchased to install in a XDm-5.2-9mm [NM-EIC Target, w/Barsto MT Barrel]. went to the website, watched the video as this is the first XD i've owned. the videos are very basic and give no detail how to make the trigger bar work properly. i installed everything else and then figured out how to take off enough material to get the t-bar into the frame. while the trigger was lighter and smoother it now had a lot of 'mush' at the break. due to the design of the bar, the bar radius makes contact with the frame radius and does NOT give a true over travel stop. further the trigger pull was still much longer than i liked. when i removed material from the sear, the 'over-travel' [such as it was] became useless. being no instructions are provided, you need to learn on your own what works or in what order to install this system. the only reason i can think of to not provide some instruction is either liability issues or they want you to spend the extra money for them to install it.
the PRP is a more well thought out over-travel trigger and comes with instructions. knowing what i know, now, i would NOT have purchased the Springer system.
Very good kit(19.08.2012)
Requires fitting of over-travel boss on trigger bar, but that is where the most improvement of trigger pull was for me. Other parts are drop-in.
50,000+ rounds in competition (03.11.2017)
I used this in my XD45 Tactical. Got the trigger pull down to 3.75 pounds from over 6 original. Fitting is relatively easy. Works great.
I like it so much I put another in a recently purchased XDm OSP.
Excellent Kit(14.11.2009)
Small amount of fitting requird on the trigger bar, but no more long trigger pull, about 50% less and much better break price is high for what it is but now i love my xd
Very disappointed!(04.03.2011)
I bought this trigger kit because it was the most expensive and so I expected the highest quality and best performance possible. My particular XD had far too much trigger travel, and the factory pull weight buried my trigger scale. After installation, the trigger travel was reduced by 1/16 inch, and the pull weight still buried the trigger scale. I contacted Springer Precision and explained my situation and asked if I could send it back and I was told NO. The owner of Powder River Precision heard my story and felt so bad he sent me his kit AT NO CHARGE! I have the Powder River Precision kit in this XD now, and the trigger pull is 1/8 TOTAL and the trigger pull weight is 5 lbs. Thank you Powder River.
Great kit!(28.10.2011)
The trigger bar broke after around 30k rounds on my girlfriends XD9. I installed this kit and holy smokes what a difference it makes! If your after a shorter, lighter trigger pull this is the kit for you.
NOTE: This kit does require fitting the trigger bar to make it work. If you don't know what this means look for the installation video's (youtube)and make sure you're up to the task before you lay down the cash!
defeats trigger safety(18.02.2017)
Bought the XD Subcompact as a defense pistol instead of the new single stack Glock since it had a grip safety in addition to trigger safety. Didn't like the heavy trigger pull and creep with this short barrel defense gun so I bought kit and had a gunsmith install. Great features: did reduce trigger pull. Did shorten creep. Bad feature: defeated trigger safety. If you are okay with that then it is a good product that does what it promises.