Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
SIG SAUER P210A LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370116669 296000547
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
899 899 1 NOK
Produktnr.: 296000547
EGW SIG P210A LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Produsentnr.: 49398 841370116669 Materiale: 7075 Aluminium Belegg: Matt svart hardcoat Total lengde: 1.811" Total bredde: .99" Monteringsutstyr: (2) 6-32 knappehodeskruer, (2) 6-32 flat hodeskruer, (1) 6-32 sett skrue Rødpunktsikte tilpasning: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGWs rødpunktsikter er ment for å installeres fra venstre til høyre (med munningen vendt fremover). Sporet har en progressiv avsmalning for å tillate enklere installasjon. Fjern ganske enkelt baksiktet på pistolen din og erstatt det med vår montasje for å montere ditt Vortex Viper/Venom, Burris FastFire eller Docter rødpunktsikte. Ingen modifikasjoner er nødvendige. Du kan når som helst ta av vår montasje og erstatte baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i sporet Stram sett skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (plasser et lite stykke papir mellom rødpunktsiktet og siktemontasjen for enklere fjerning og for å holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Stram monteringsskruene til 15in/lbs 2 knappehodeskruer - Levert for Vortex Viper og Venom sikter 2 flat hodeskruer - Levert for Burris FastFire og Docter sikter Skruene som følger med denne montasjen krever en 5/64'' unbrakonøkkel for installasjon.
899 NOK 1 kr 899,00 *
Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA
Spesifikasjoner: Farge: Black Make: Sig Sauer Material: Aluminum Modell: P210A Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: Sig Sauer Material: Aluminum Modell: P210A Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,033kg Frakthøyde: 25mm Fraktbredde: 89mm Fraktlengde: 140mm

Elementdetaljer

Made in USA




Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Nyhetsbrev