Non-Magnetic Assortment With Handle-Ratchet-Bits-Case
Small, compact kit for field maintenance/ repair on guns. Snap-lock, unbreakable, polyethylene case. Each alloy steel bit is held in the handle by ball detents and stop. Extension is equipped with set screw for permanent setup. Midget ratchet fits all bits, has 200 lb. working torque strength. Bits NOT guaranteed against breakage.
SPECS: Set contains handle; extension; ratchet; 12 slotted bits; 2 Phillips bits and 1 Allen bit. 4½" (11.4cm) x 6" (15.2cm) case.
Mer...
Ikke-magnetisk utvalg med håndtak-skralle-bits-sak
Lite, kompakte sett for feltvedlikehold / reparasjon på våpen. Snap-lock, uknuselig, polyetylenkasse. Hver legert stålbit holdes i håndtaket av kulehåndtak og stopp. Forlengelse er utstyrt med stillskrue for permanent oppsett. Midget skralle passer til alle biter, har 200 kg arbeidsmomentstyrke. Biter IKKE garantert mot brudd.
SPECS: Sett inneholder håndtak; forlengelse; skralle; 12 slissede biter; 2 Phillips-biter og 1 unbrakonbit. 4 "(11,4 cm) x 6" (15,2 cm) etui.
Mer...
Kundevurderinger for Screwdriver Set
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 4,5
Mostly Good But Room for Improvement(12.01.2012)
This is a handy kit to keep around for any level of gun work. It's crafted from good steel as far as I can tell. The screw driver handily and ratchet are both quality and solidly designed, these are tools for lifetime. The issues that I have are that the bits are not de-burred. There are many sharp and protruding edges, at least on the bits I received. The ratchet also had a very sharp edge where the round hole had been punched out for the head. So these are quality tools but the manufacturer didn't finish his/her job. With a little elbow grease you can do the job yourself and it's good to go.
Quality American made Tools(16.06.2012)
At Chapman MFG we strive to make quality American made tools with American made materials, at a reasonable price.
We were embarrassed to read this review. We have quality control inspections at several points in the manufacture and kit assembly. This should not have happened and we apologize.
Our tools are guaranteed to be free of defects caused by materials or workmanship. We work hard to manufacture quality precision tools. Quality tools and customer service are our top priorities.
172960000 Screwdriver Set Produsentnr.: 9600 Lite, kompakte sett for feltvedlikehold / reparasjon på våpen. Snap-lock, uknuselig, polyetylenkasse. Hver legert stålbit holdes i håndtaket av kulehåndtak og stopp. Forlengelse er utstyrt med stillskrue for permanent oppsett. Midget skralle passer til alle biter, har 200 kg arbeidsmomentstyrke. Biter IKKE garantert mot brudd.
172960130 Midget Offset-Ratchet Produsentnr.: CM13 Lite, kompakte sett for feltvedlikehold / reparasjon på våpen. Snap-lock, uknuselig, polyetylenkasse. Hver legert stålbit holdes i håndtaket av kulehåndtak og stopp. Forlengelse er utstyrt med stillskrue for permanent oppsett. Midget skralle passer til alle biter, har 200 kg arbeidsmomentstyrke. Biter IKKE garantert mot brudd.
Non-Magnetic Assortment With Handle-Ratchet-Bits-Case
Small, compact kit for field maintenance/ repair on guns. Snap-lock, unbreakable, polyethylene case. Each alloy steel bit is held in the handle by ball detents and stop. Extension is equipped with set screw for permanent setup. Midget ratchet fits all bits, has 200 lb. working torque strength. Bits NOT guaranteed against breakage.
SPECS: Set contains handle; extension; ratchet; 12 slotted bits; 2 Phillips bits and 1 Allen bit. 4½" (11.4cm) x 6" (15.2cm) case.
Mer...
Ikke-magnetisk utvalg med håndtak-skralle-bits-sak
Lite, kompakte sett for feltvedlikehold / reparasjon på våpen. Snap-lock, uknuselig, polyetylenkasse. Hver legert stålbit holdes i håndtaket av kulehåndtak og stopp. Forlengelse er utstyrt med stillskrue for permanent oppsett. Midget skralle passer til alle biter, har 200 kg arbeidsmomentstyrke. Biter IKKE garantert mot brudd.
SPECS: Sett inneholder håndtak; forlengelse; skralle; 12 slissede biter; 2 Phillips-biter og 1 unbrakonbit. 4 "(11,4 cm) x 6" (15,2 cm) etui.
Mer...
Kundevurderinger for Screwdriver Set
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 4,5
Mostly Good But Room for Improvement(12.01.2012)
This is a handy kit to keep around for any level of gun work. It's crafted from good steel as far as I can tell. The screw driver handily and ratchet are both quality and solidly designed, these are tools for lifetime. The issues that I have are that the bits are not de-burred. There are many sharp and protruding edges, at least on the bits I received. The ratchet also had a very sharp edge where the round hole had been punched out for the head. So these are quality tools but the manufacturer didn't finish his/her job. With a little elbow grease you can do the job yourself and it's good to go.
Quality American made Tools(16.06.2012)
At Chapman MFG we strive to make quality American made tools with American made materials, at a reasonable price.
We were embarrassed to read this review. We have quality control inspections at several points in the manufacture and kit assembly. This should not have happened and we apologize.
Our tools are guaranteed to be free of defects caused by materials or workmanship. We work hard to manufacture quality precision tools. Quality tools and customer service are our top priorities.