Shock-absorbing polyurethane buffer replaces the bolt stop pin to eliminate metal-to-metal contact and extend receiver life. Cushions the bolt’s rearward motion to help prevent receiver cracking, reduce felt recoil, and enable quieter cycling.
SPECS: Polyurethane. Fits 10/22 in .22 LR only. This buffer may be manufactured in various colors but when properly installed it will not be visible.
Mer...
Bidrar til å Forlenge Levetiden på Mottakeren & Redusere Følt Rekyl
Støtabsorberende polyuretanbuffer erstatter boltestoppinnen for å eliminere metall-mot-metall kontakt og forlenge levetiden på mottakeren. Dempet boltenes bakoverbevegelse for å bidra til å forhindre sprekker i mottakeren, redusere følt rekyl og muliggjøre roligere sykling av våpenet.
SPECS: Polyuretan. Passer til 10/22 i .22 LR kun. Denne bufferen kan være produsert i ulike farger, men når den er riktig installert vil den ikke være synlig.
Mer...
Kundevurderinger for TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 2,6
Good product.(29.11.2011)
Easy to install and works as described.
Poor Quality Control, Uneven Ends(21.12.2011)
The buffer provided looks nothing like the picture and is jet black, it is cut too short and at an angle on one end. Really poor quality control... it will probalby do the job but will look unfitted.
Works Okay(08.05.2012)
There's no rocket science going into this part. I can't really tell if it reduces felt recoil (and doubt that it does) but it makes sense that it would extend the life of the receiver and bolt. For this price, I don't see how this can be a bad thing.
TacSol should be embarrassed(03.06.2012)
Like the other reviewer said, a filmsy plastic tubing, poorly cut. I think the packaging costs more than the product itself. Anyone could go to a hardware store and buy a roll of cheap plastic tubing and cut it to size, which is what it looks like they did.
I would send it back, but shipping will cost more than the part itself.
DO NOT BUY!
bought two bad mistake(01.11.2012)
buffer pins are not straight ends sheared off and not perpindicular also too short
Waste of money(16.01.2013)
Quality was poor, ends not cut straight and cylinder was slighty disformed. Item fits snugly but will not go all the way through. Even added a drop of breakfree and did not help. Using the slightest hand pressure exerted to make it flush, the end will mushroom. Buy at your own risk...
Easy install(16.10.2016)
The one I received was a better fit than the factory installed seel buffer that fell out once receiver was removed from stock. Well made good fit.
run away(22.01.2018)
I love most all of Tactical Solutions products but not this one.
too difficult to install(02.02.2018)
may work for the intended purpose, but way too difficult to install. they will never go back in when I remove them to remove bolt.
Produktnr.: 100006001 TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER Produsentnr.: XRACCBF879971001961 Støtabsorberende polyuretanbuffer erstatter boltestoppinnen for å eliminere metall-mot-metall kontakt og forlenge levetiden på mottakeren. Dempet boltenes bakoverbevegelse for å bidra til å forhindre sprekker i mottakeren, redusere følt rekyl og muliggjøre roligere sykling av våpenet.
169NOK2kr 169,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Shock-absorbing polyurethane buffer replaces the bolt stop pin to eliminate metal-to-metal contact and extend receiver life. Cushions the bolt’s rearward motion to help prevent receiver cracking, reduce felt recoil, and enable quieter cycling.
SPECS: Polyurethane. Fits 10/22 in .22 LR only. This buffer may be manufactured in various colors but when properly installed it will not be visible.
Mer...
Bidrar til å Forlenge Levetiden på Mottakeren & Redusere Følt Rekyl
Støtabsorberende polyuretanbuffer erstatter boltestoppinnen for å eliminere metall-mot-metall kontakt og forlenge levetiden på mottakeren. Dempet boltenes bakoverbevegelse for å bidra til å forhindre sprekker i mottakeren, redusere følt rekyl og muliggjøre roligere sykling av våpenet.
SPECS: Polyuretan. Passer til 10/22 i .22 LR kun. Denne bufferen kan være produsert i ulike farger, men når den er riktig installert vil den ikke være synlig.
Mer...
Kundevurderinger for TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 2,6
Good product.(29.11.2011)
Easy to install and works as described.
Poor Quality Control, Uneven Ends(21.12.2011)
The buffer provided looks nothing like the picture and is jet black, it is cut too short and at an angle on one end. Really poor quality control... it will probalby do the job but will look unfitted.
Works Okay(08.05.2012)
There's no rocket science going into this part. I can't really tell if it reduces felt recoil (and doubt that it does) but it makes sense that it would extend the life of the receiver and bolt. For this price, I don't see how this can be a bad thing.
TacSol should be embarrassed(03.06.2012)
Like the other reviewer said, a filmsy plastic tubing, poorly cut. I think the packaging costs more than the product itself. Anyone could go to a hardware store and buy a roll of cheap plastic tubing and cut it to size, which is what it looks like they did.
I would send it back, but shipping will cost more than the part itself.
DO NOT BUY!
bought two bad mistake(01.11.2012)
buffer pins are not straight ends sheared off and not perpindicular also too short
Waste of money(16.01.2013)
Quality was poor, ends not cut straight and cylinder was slighty disformed. Item fits snugly but will not go all the way through. Even added a drop of breakfree and did not help. Using the slightest hand pressure exerted to make it flush, the end will mushroom. Buy at your own risk...
Easy install(16.10.2016)
The one I received was a better fit than the factory installed seel buffer that fell out once receiver was removed from stock. Well made good fit.
run away(22.01.2018)
I love most all of Tactical Solutions products but not this one.
too difficult to install(02.02.2018)
may work for the intended purpose, but way too difficult to install. they will never go back in when I remove them to remove bolt.