Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS PICATINNY SCOPE RINGS


Auto-oversatt beskrivelse (Beskrivelse - Produsent): Disse ringene er presisjonsmaskiner til ekte MIL-STD 1913 spesifikasjoner for å passe baser av Picatinny-typen som Brownells Modular Flattop Riser Mount og Picatinny Scope Bases. Ingen spesielle skiftenøkler trengs for installasjon. Mer...

050806109896 080000741
Robust, Versatile, Affordable Rings For Tactical & Sporting Rifles
These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage—you can even use a U.S. quarter in a pinch. Crossbolt has a square shank that serves as a recoil lug to solidly engage scope base when properly installed to ensure rings won’t shift forward under recoil. Four, strong 6-40 x ¼" T-15 Torx® head screws securely anchor the ring halves, and large contact area with scope helps prevent slippage even on heavy-recoiling, magnum rifles. Available in 4140 billet steel for superb strength and stability, or aluminum models machined from 6061 T6 billet for reduced weight. Matte black finish blends with most factory rifle and scope finishes. Replacement nut, crossbolt, and aluminum or steel side locking bars available separately.

SPECS: Rings sold in pairs. Models available to fit 30mm scope bodies. Steel - 4140 billet steel, black, matte, oxide finish. Heights measured from top of base to center of ring: Extra-High - 1.375" (3.5cm).

 

BROWNELLS
1467 1467 1 NOK
080000741
30mm Extra-High (1.375") Steel Rings 050806109896 Disse ringene er presisjonsmaskiner til ekte MIL-STD 1913 spesifikasjoner for å passe baser av Picatinny-typen som Brownells Modular Flattop Riser Mount og Picatinny Scope Bases. Ingen spesielle skiftenøkler trengs for installasjon. Undersiden av ringen er underskåret med en avrundet radius som gir ekstra klaring for fingerstramming av mutteren og for sluttstramming med en standard sokkel eller flatblad skrutrekker. Ekstra sterke amerikanske sekskantsmuttere har en dyp spalte som gir maksimalt inngrep med skrutrekkerbladet for å forhindre glidning og skader på sporet - du kan til og med bruke et amerikansk kvartal i en klemme. Crossbolt har en firkantet skaft som fungerer som en rekylbøyle for solid inngrep i omfangsbasen når den er riktig installert for å sikre at ringene ikke forskyves fremover under rekylen. Fire, sterke 6-40 x ¼ "T-15 Torx® hodeskruer forankrer ringhalvdelene sikkert, og stort kontaktareal med omfang hjelper til å forhindre glidning selv på kraftige rekoiling, magnum rifler. Finnes i 4140 billetstål for ypperlig styrke og stabilitet , eller aluminiumsmodeller som er maskinert fra 6061 T6-billet for redusert vekt. Mattsvart finish blandes med de fleste fabrikk rifle og omfang.
1467 NOK 0 kr 1 467,00 *

Kan restnoteres
Spesifikasjoner: Finish: Matte Black Height: 1.375'' Material: Steel Scope Tube Diameter: 30mm Size: Extra High Style: Picatinny Rings

Attributes

Finish: Matte Black Height: 1.375'' Material: Steel Scope Tube Diameter: 30mm Size: Extra High Style: Picatinny Rings

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.y.2.




Robust, Versatile, Affordable Rings For Tactical & Sporting Rifles
These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage—you can even use a U.S. quarter in a pinch. Crossbolt has a square shank that serves as a recoil lug to solidly engage scope base when properly installed to ensure rings won’t shift forward under recoil. Four, strong 6-40 x ¼" T-15 Torx® head screws securely anchor the ring halves, and large contact area with scope helps prevent slippage even on heavy-recoiling, magnum rifles. Available in 4140 billet steel for superb strength and stability, or aluminum models machined from 6061 T6 billet for reduced weight. Matte black finish blends with most factory rifle and scope finishes. Replacement nut, crossbolt, and aluminum or steel side locking bars available separately.

SPECS: Rings sold in pairs. Models available to fit 30mm scope bodies. Steel - 4140 billet steel, black, matte, oxide finish. Heights measured from top of base to center of ring: Extra-High - 1.375" (3.5cm).

 

Utsolgt Dette produktet kan dessverre ikke restnoteres.
kr 149,00 * kr 149,00 - kr 162,00*
Kan restnoteres Kan restnoteres
kr 208,00 * kr 159,00 - kr 236,00*
Kan restnoteres Kan restnoteres
kr 2 255,00 *
Nyhetsbrev