Auto-oversatt beskrivelse (Beskrivelse - Produsent): Alt tilleggsutstyret som er tilgjengelig for standard P500 Universal Sight Tool er i dette P500 PRO Universal Sight Tool. Lagt til en to-posisjon Hold nede Clampo som er festet til verktøyet. Mer...
All of the optional accessories that are available for the standard P500 Universal Sight Tool are in this P500 PRO Universal Sight Tool. Added a two position Hold Down Clampo that is attached to the tool. This speeds the set up time, and greatly increases the strength of the tool, by preventing the slide from lifting or twisting. Also added an End Plate to add strength and it doubles as a Slide Stop. The most important additions are the newly designed Pusher Tips. These hardened steel tips use the cross member as a guide to prevent rotation that may cause scaring of the sight. One of the tips is squared on the end for standard sights. The other is made with an angle to fit against a tapered sight, such as the Glock.
Mer...
Alt tilleggsutstyret som er tilgjengelig for standard P500 Universal Sight Tool er i dette P500 PRO Universal Sight Tool. Lagt til en to-posisjon Hold nede Clampo som er festet til verktøyet. Dette øker oppsetttiden og øker styrken på verktøyet kraftig ved å forhindre at lysbildet løftes eller vrir seg. Lagt også til en sluttplate for å legge til styrke, og den fungerer som et lysbildestopp. De viktigste tilleggene er de nydesignede Pusher Tips. Disse herdede stålspissene bruker tverrlegemet som en guide for å forhindre rotasjon som kan forårsake skremmende syn. Et av tipsene er firkantet på enden for standard severdigheter. Den andre er laget med en vinkel som passer mot et avsmalnet syn, for eksempel Glock.
Mer...
Kundevurderinger for P500 Pro Universal Sight Tool
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,7
Shadow Shooters Rejoice!!(27.02.2013)
I'm currently a Canadian IPSC competitor (production class), and for a very long time I've been looking for a sight pusher to add to my ever-growing bag of accessories.
After ordering this product (on-line) from Brownells, in a little over a week I had received delivery (to Canada no less).
I am very pleased to report that within minutes of setting up the P500 Pro, I had successfully adjusted the sights on my CZ 75 SP01 Shadow with ease! The best part of all is that the threaded push-pin allows for super fine micro adjustment in comparison to the old "hammer and punch" method. Not to mention, I can easily take this bad boy to the range. Try that with your vise and mallet.
For anyone out there looking for a sight pusher that will work specifically on an SP01 Shadow (and many other models, I would suspect), I highly recommend you pick one up.
The extra shipping cost and Canadian duty on this product are well worth the price to have instant adjustment available on my sights at any range or match should they happen to drift.
WORKS AWSOME(13.04.2013)
I CHANG SITES AND ALSO FIBER OPTIC SITES HAVE INSTALLED AND REMOVED AT THE PRICE OF A GUN SMITH ITS WORTH THE MONEY EXCLLENT TOOL FITS S&W PROFORMANCE AND KIMBER ETC THUMBS UP ON THIS TOOL
Good Heavy Duty Tool!(31.10.2013)
Hi, I needed this tool to drift sights on some M57 Yugoslavian Tokarevs. With the screw system you can really "dial in" the sights. You can't get that kind of precision with the old hammer and punch system. I picked this over the standard B&J tool as this came with all the parts attached and had a cross piece at the rear for extra strength. The directions were a little vague due to poor printing of the pictures. I contacted B&J and they sent me color pictures in 1 hour. This tool should be great for installing/uninstalling sights on all autos. They recommend that you remove all slide mounted safeties,levers etc. They included extra washers ,two are needed" and caps for using a vise and I appreciate that.
New & Improved(11.02.2014)
I have the older model, without the added end plate. After using it a couple of times I ordered the (at that time) optional hold-down clamp. I have removed/installed sights on numerous Glocks of all models, with no problems at all. I have used the tool to drift rear sights on several 1911s, also with no problem. If you do more than an occasional sight, this tool is well worth the money. This tool allows you to move the sight in small increments to correct for windage, rather than using a hammer & punch and moving the sight either too much or not enough.
Good tool great customer service(22.04.2014)
Have been using this press for a couple of years now and it works great as long as you watch what your doing. When pressing out a sight make sure that it is not going to mar you gun. If it is about to, just add some distance between the pusher and wear its going to hit your gun. It doesn't take a genus to do so. I've done three XD's for customers and it is difficult but manageable. When I needed a new push screw B&J hooked me up along with some other small parts I didn't even ask for. There customer service was on point.
Needs Pushers With More Varied Angles(13.09.2014)
Works well as intended. Must follow directions carefully to avoid damage to slide.
What is really needed are additional pushers with varying degrees for angle to fit more sight variations. It is furnished with a straight and angled pusher, neither of which matched my sights.
Works for USP 9 and Hi-pro Novak sight(12.10.2014)
For those of us with USP's, proper tools and equipment are expensive and rare. I was trying to convert a regular usp 9 to a USP tactical and my last step was the Novak red fiber optic sights. The rear sight is not too difficult, but the front sight were near impossible to do with other sight tools, and even the more specific, expensive sight tools do not work for high profile iron sights. I broke one front sight and marred the second one badly using another sight tool. However, this universal tool made such an installation near child's play.Yes you still need to be patient (check alignment with every turn or so) and you still need some cushion (thin micro-cloth or paper) between the pusher and the sight. I would also suggest placing something between the slide and the part of the sight that protrudes out of the friction fit slot. I was actually surprise that I could push the sight w/o assistance from a vise. Lastly if you wish to purchase a less decked out P500, please inquire to the manufacturer about shims (or something like that) that can help out with the especially difficult front sight front sight for the USP. Other than that I wish to say: Thanks B&J machine for the help! :)
Best Universal Pistol Pusher(16.07.2015)
Bit the bullet and bought this tool after becoming frustrated with several other sight pushers. For pistol work I can't think of any other on the market that works as well as this one. It takes a little time to adjust and align to your particular slide but once the slide is secured it is easy to use and will move your sight without worry of damage to your firearm.
Great Investment fo personal handguns(09.11.2016)
Got it and followed instructions provided. I was able to replace sights on Sig 320 with Nite Sights. Also replaced neighbors sights.
694000005 P500 Pro Universal Sight Tool Produsentnr.: P500PRO617407958102 Alt tilleggsutstyret som er tilgjengelig for standard P500 Universal Sight Tool er i dette P500 PRO Universal Sight Tool. Lagt til en to-posisjon Hold nede Clampo som er festet til verktøyet. Dette øker oppsetttiden og øker styrken på verktøyet kraftig ved å forhindre at lysbildet løftes eller vrir seg. Lagt også til en sluttplate for å legge til styrke, og den fungerer som et lysbildestopp. De viktigste tilleggene er de nydesignede Pusher Tips. Disse herdede stålspissene bruker tverrlegemet som en guide for å forhindre rotasjon som kan forårsake skremmende syn. Et av tipsene er firkantet på enden for standard severdigheter. Den andre er laget med en vinkel som passer mot et avsmalnet syn, for eksempel Glock.
All of the optional accessories that are available for the standard P500 Universal Sight Tool are in this P500 PRO Universal Sight Tool. Added a two position Hold Down Clampo that is attached to the tool. This speeds the set up time, and greatly increases the strength of the tool, by preventing the slide from lifting or twisting. Also added an End Plate to add strength and it doubles as a Slide Stop. The most important additions are the newly designed Pusher Tips. These hardened steel tips use the cross member as a guide to prevent rotation that may cause scaring of the sight. One of the tips is squared on the end for standard sights. The other is made with an angle to fit against a tapered sight, such as the Glock.
Mer...
Alt tilleggsutstyret som er tilgjengelig for standard P500 Universal Sight Tool er i dette P500 PRO Universal Sight Tool. Lagt til en to-posisjon Hold nede Clampo som er festet til verktøyet. Dette øker oppsetttiden og øker styrken på verktøyet kraftig ved å forhindre at lysbildet løftes eller vrir seg. Lagt også til en sluttplate for å legge til styrke, og den fungerer som et lysbildestopp. De viktigste tilleggene er de nydesignede Pusher Tips. Disse herdede stålspissene bruker tverrlegemet som en guide for å forhindre rotasjon som kan forårsake skremmende syn. Et av tipsene er firkantet på enden for standard severdigheter. Den andre er laget med en vinkel som passer mot et avsmalnet syn, for eksempel Glock.
Mer...
Kundevurderinger for P500 Pro Universal Sight Tool
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,7
Shadow Shooters Rejoice!!(27.02.2013)
I'm currently a Canadian IPSC competitor (production class), and for a very long time I've been looking for a sight pusher to add to my ever-growing bag of accessories.
After ordering this product (on-line) from Brownells, in a little over a week I had received delivery (to Canada no less).
I am very pleased to report that within minutes of setting up the P500 Pro, I had successfully adjusted the sights on my CZ 75 SP01 Shadow with ease! The best part of all is that the threaded push-pin allows for super fine micro adjustment in comparison to the old "hammer and punch" method. Not to mention, I can easily take this bad boy to the range. Try that with your vise and mallet.
For anyone out there looking for a sight pusher that will work specifically on an SP01 Shadow (and many other models, I would suspect), I highly recommend you pick one up.
The extra shipping cost and Canadian duty on this product are well worth the price to have instant adjustment available on my sights at any range or match should they happen to drift.
WORKS AWSOME(13.04.2013)
I CHANG SITES AND ALSO FIBER OPTIC SITES HAVE INSTALLED AND REMOVED AT THE PRICE OF A GUN SMITH ITS WORTH THE MONEY EXCLLENT TOOL FITS S&W PROFORMANCE AND KIMBER ETC THUMBS UP ON THIS TOOL
Good Heavy Duty Tool!(31.10.2013)
Hi, I needed this tool to drift sights on some M57 Yugoslavian Tokarevs. With the screw system you can really "dial in" the sights. You can't get that kind of precision with the old hammer and punch system. I picked this over the standard B&J tool as this came with all the parts attached and had a cross piece at the rear for extra strength. The directions were a little vague due to poor printing of the pictures. I contacted B&J and they sent me color pictures in 1 hour. This tool should be great for installing/uninstalling sights on all autos. They recommend that you remove all slide mounted safeties,levers etc. They included extra washers ,two are needed" and caps for using a vise and I appreciate that.
New & Improved(11.02.2014)
I have the older model, without the added end plate. After using it a couple of times I ordered the (at that time) optional hold-down clamp. I have removed/installed sights on numerous Glocks of all models, with no problems at all. I have used the tool to drift rear sights on several 1911s, also with no problem. If you do more than an occasional sight, this tool is well worth the money. This tool allows you to move the sight in small increments to correct for windage, rather than using a hammer & punch and moving the sight either too much or not enough.
Good tool great customer service(22.04.2014)
Have been using this press for a couple of years now and it works great as long as you watch what your doing. When pressing out a sight make sure that it is not going to mar you gun. If it is about to, just add some distance between the pusher and wear its going to hit your gun. It doesn't take a genus to do so. I've done three XD's for customers and it is difficult but manageable. When I needed a new push screw B&J hooked me up along with some other small parts I didn't even ask for. There customer service was on point.
Needs Pushers With More Varied Angles(13.09.2014)
Works well as intended. Must follow directions carefully to avoid damage to slide.
What is really needed are additional pushers with varying degrees for angle to fit more sight variations. It is furnished with a straight and angled pusher, neither of which matched my sights.
Works for USP 9 and Hi-pro Novak sight(12.10.2014)
For those of us with USP's, proper tools and equipment are expensive and rare. I was trying to convert a regular usp 9 to a USP tactical and my last step was the Novak red fiber optic sights. The rear sight is not too difficult, but the front sight were near impossible to do with other sight tools, and even the more specific, expensive sight tools do not work for high profile iron sights. I broke one front sight and marred the second one badly using another sight tool. However, this universal tool made such an installation near child's play.Yes you still need to be patient (check alignment with every turn or so) and you still need some cushion (thin micro-cloth or paper) between the pusher and the sight. I would also suggest placing something between the slide and the part of the sight that protrudes out of the friction fit slot. I was actually surprise that I could push the sight w/o assistance from a vise. Lastly if you wish to purchase a less decked out P500, please inquire to the manufacturer about shims (or something like that) that can help out with the especially difficult front sight front sight for the USP. Other than that I wish to say: Thanks B&J machine for the help! :)
Best Universal Pistol Pusher(16.07.2015)
Bit the bullet and bought this tool after becoming frustrated with several other sight pushers. For pistol work I can't think of any other on the market that works as well as this one. It takes a little time to adjust and align to your particular slide but once the slide is secured it is easy to use and will move your sight without worry of damage to your firearm.
Great Investment fo personal handguns(09.11.2016)
Got it and followed instructions provided. I was able to replace sights on Sig 320 with Nite Sights. Also replaced neighbors sights.