Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
100004429
Top-Quality Machinist Tool For Precision Work
Spring-loaded mechanical tool locates the exact distance from the center of the mill spindle to the edge of the work piece so you know precisely how deep you’re milling, without guessing. Easy-to-use—just insert in the mill collet, run at 500-1000 rpm, and move slowly to the edge you want to locate. As the lower cylinder of the Edge Finder touches the work piece edge, it “kicks out” suddenly. When you see the kick, the spindle centerline is located exactly .100" from the edge of the work piece.

SPECS: Steel, surface ground and hardened. 27⁄8" (7.3cm) OAL, 3⁄8" (9.5mm) diameter shank, .200" (5.1mm) diameter tip.

0 0 1 NOK
Produktnr.: 100004429
FISHER MACHINE SHOP MICRO EDGE FINDER
Produsentnr.: A Vårfjærbelastet mekanisk verktøy som lokaliserer den eksakte avstanden fra sentrum av fresemaskinens spindel til kanten av arbeidsstykket, slik at du vet nøyaktig hvor dypt du freser, uten å gjette. Enkel å bruke – bare sett den i fresemaskinens chuck, kjør med 500-1000 rpm, og beveg sakte mot kanten du vil lokalisere. Når den nedre sylinderen av Edge Finder berører kanten av arbeidsstykket, vil den "sparke ut" plutselig. Når du ser sparket, er spindelens sentrumslinje lokalisert nøyaktig .100" fra kanten av arbeidsstykket.
Varsle ved tilgjengelighet
Ikke tilgjengelig.

Attributes

Leveringsvekt: 0,045kg Frakthøyde: 8mm Fraktbredde: 33mm Fraktlengde: 89mm

Elementdetaljer

Made in USA




Top-Quality Machinist Tool For Precision Work
Spring-loaded mechanical tool locates the exact distance from the center of the mill spindle to the edge of the work piece so you know precisely how deep you’re milling, without guessing. Easy-to-use—just insert in the mill collet, run at 500-1000 rpm, and move slowly to the edge you want to locate. As the lower cylinder of the Edge Finder touches the work piece edge, it “kicks out” suddenly. When you see the kick, the spindle centerline is located exactly .100" from the edge of the work piece.

SPECS: Steel, surface ground and hardened. 27⁄8" (7.3cm) OAL, 3⁄8" (9.5mm) diameter shank, .200" (5.1mm) diameter tip.

Nyhetsbrev