Upgrade the bolt handle assembly in the 10/22® Slick guide rod for easy racking Interchangeable tuning springs:(White=standard, Red=10% increase, Green=10% decrease) This great upgrade kit for your 10/22® will provide you with a comfortable bolt handle to grasp, a "super slick" guide rod, and the ability to tune the recoil of your rifle with our interchangeable springs. All bolt handle lengths are 1 3/4", which is 1/4" longer than the factory bolt handle assembly kit giving greater clearance for the shooter's knuckles while racking the bolt. The three tuning springs come in varying tensions for the ultimate in tuning capability. Though by and large the standard tension spring will serve the shooter throughout the different ammunition velocities. If, due to tolerance stacking or preferred ammunition the cycling of the action is out of sync then the shooter has the capability to change the spring without using the more primitive method of cutting coils to tune a spring. Handle Weights: black 762 (modified z shape flute)= .3 oz Precision ground guide rod is made from hardened tool steel and held to 2/10,000" tolerance throughout its entire length. The rod is nitride treated which gives its surface a 70C rockwell (harder than a file) surface hardness. Guaranteed the smoothest and slickest guide rod in the industry. Packaging Includes: bolt handle guide rod 3 tuning springs Installation instructions: After removing the stock from the barreled action, remove the trigger and bolt stop. This will allow the needed clearance for the bolt to be removed along with the bolt handle assembly. After choosing your proper spring tension slip the bolt handle assembly in from the ejection port, placing the cone end of the rod into the containment hole in the receiver. Then fully compress the bolt handle assembly while placing the bolt on it. After the mating of the bolt handle and bolt, let off the containment allowing the bolt to go forward. Install the bolt stop pin, trigger and stock. The video below offers some of the finer installation points.
Oppgrader din Ruger 10/22 med KIDD GUIDE ROD & SPRING KIT!
Dette oppgraderingssettet for din Ruger 10/22® gir deg en komfortabel bolt håndtak å gripe, en "super slick" guide rod, og muligheten til å justere rekyl med våre utskiftbare fjærer.
Produktbeskrivelse:
- Oppgrader bolt håndtaket: Oppgrader bolt håndtaket i 10/22® med et slick guide rod for enkel lading.
- Utskiftbare tuning fjærer: (Hvit=standard, Rød=10% økning, Grønn=10% reduksjon) Dette gir deg muligheten til å tilpasse rekyl etter dine preferanser.
- Komfortabelt design: Alle bolt håndtak lengder er 1 3/4", som er 1/4" lengre enn fabrikkens bolt håndtak, noe som gir bedre klaring for skyttens knoker.
- Variabel fjærspenning: De tre tuning fjærene kommer i varierende spenninger for maksimal tilpasningsmulighet.
- Handle vekter: svart 762 (modifisert z-formet flute) = .3 oz.
- Presisjonslaget guide rod: Laget av herdet verktøystål og holdt til 2/10,000" toleranse gjennom hele lengden.
- Nitride behandling: Gir overflaten en 70C rockwell hardhet (hardere enn en fil).
- Garanti: Den glatteste og slickeste guide rod i bransjen.
Pakkens innhold:
- Bolt håndtak
- Guide rod
- 3 tuning fjærer
Installasjonsinstruksjoner:
Etter å ha fjernet skjelettet fra den barreled handling, fjern avtrekkeren og boltstoppen. Dette gir nødvendig klaring for at bolten kan fjernes sammen med bolt håndtaket. Etter å ha valgt riktig fjærspenning, sett bolt håndtaket inn fra utkastporten, og plasser konen av stangen inn i oppbevaringshullet i mottakeren. Komprimer bolt håndtaket helt mens du plasserer bolten på det. Etter sammenkoblingen av bolt håndtaket og bolten, slipp oppbevaringen slik at bolten kan gå fremover. Installer boltstoppen, avtrekkeren og skjelettet. Videoen nedenfor tilbyr noen av de finere installasjonspunktene.