Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
H&K USP LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370114245 296000681
EGW red dot sightsare meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: USP Compact (rear sight cut depth is .200"" instead of .160"") USP Expert USP Elite VP9 VP40 P30 P30L P30SK HK45 HK45C
0 0 1 NOK
Produktnr.: 296000681
EGW H&K USP LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Produsentnr.: 49406 841370114245 EGW rødpunktsikter er ment for å installeres fra venstre mot høyre (med munningen vendt fremover). Skinnen har en progressiv skråning for å tillate enklere installasjon. Bare fjern baksiktet på våpenet ditt og erstatt det med EGW-monteringen for å montere ditt Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, eller Optima rødpunktsikte. Ingen modifikasjoner er nødvendige. Du kan når som helst ta av monteringen og sette tilbake baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Siktemontering i skinnen Stram sett-skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Siktemontering (plassering av et lite stykke papir mellom rødpunktsiktet og siktemonteringen vil gjøre det enklere å fjerne og vil holde Loctite unna rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra momentet på monteringsskruene til 15in/lbs Modifisering av våpenet ditt kan gjøre produsentens garanti ugyldig. Dette produktet bør installeres og sjekkes av en kvalifisert børsemaker. Ingen ansvar er uttrykt eller antydet for skade eller skade som kan oppstå som følge av feil installasjon eller bruk av dette produktet. Denne monteringen passer ikke: USP Compact (baksikteskårets dybde er .200" istedenfor .160") USP Expert USP Elite VP9 VP40 P30 P30L P30SK HK45 HK45C
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Farge: Black Make: Heckler & Koch Material: Aluminum Modell: USP 45, USP 40, USP 9, USP Tactical 9mm, USP Tactical 45 Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: Heckler & Koch Material: Aluminum Modell: USP Tactical 9mm,USP Tactical 45,USP 9,USP 40,USP 45 Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 140mm

Elementdetaljer

Made in USA



EGW red dot sightsare meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: USP Compact (rear sight cut depth is .200"" instead of .160"") USP Expert USP Elite VP9 VP40 P30 P30L P30SK HK45 HK45C
Nyhetsbrev