Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

DEFIANCE MACHINE DEVIANT HUNTER ACTIONS RIGHT & LEFT HAND


LA Deviant Hunter Action .750 Bolt Face Lapua Cartridges

The ultimate precision hunter action, we designed the all-steel Deviant Hunter with an integral scope base narrowed in the center to allow top loading of BDL style magazines and remove weight while maintaining rigidity. It has one scope ring slot in the rear and four in the front. Mer...

Produktnr.: 100035998 100035998
The ultimate precision hunter action, we designed the all-steel Deviant Hunter with an integral scope base narrowed in the center to allow top loading of BDL style magazines and remove weight while maintaining rigidity. It has one scope ring slot in the rear and four in the front. The Deviant Hunter Actions come in the following configurations: Long Action Magnum Deviant Hunter with .545 Bolt Face to be used with hinge floor plates. RUM style feed lips for use with Wyatt's Ultra Mag Internal box magazines.  Designed for cartridges such as the 26, 28, & 30 Nosler, 300 PRC, Remington Ultra Magnum Cartridges. Long Action with .595 Bolt Face for use with Rigby length Internal box magazines. Designed for cartridges such as the 338 Lapua, 416 Rigby, 300 & 338 Norma and the 378 Weatherby based cartridges Medium Length Standard Action with .408 Bolt Face. For use with Wyatt .308 length Internal box magazines.  Designed for cartridges such as the .243, 6.5 Creedmoor, 6 Creedmoor, .308. Long Action Magnum with .545 Bolt Face for use with hinged floorplates. Remington style feed lips for use with Wyatt's Internal box magazines.  Designed for the Winchester Magnum family of Cartridges. Receiver made of pre-hardened aircraft certified 416 Stainless steel One-piece bolt made of pre-hardened aircraft certified 4340 Chrome moly Receiver barrel threads are 1.0625” X 16 T.P.I. (Rem. 700 thread dia. And pitch) 20 MOA scope mount, narrowed in the center to allow top loading of BDL style magazines and remove weight while maintaining rigidity. One slot in the rear and four in the front Integral recoil lug Works with hinged floorplates, detachable magazines or single shots Medium length (Rem. SA) offered with AW magazine cut Actions available in Medium, XM, and Long lengths to accommodate most popular factory chamberings and extended length hand loads Average configuration weighs 30 – 32 oz. depending on length Everything Included: Receiver body Repeater or single-shot style magazine cut Bolt stop/side bolt release, spring, pin One-piece bolt Bolt fluting (option not available on control-round feed) Extractor Bolt knob Firing pin/spring Cocking piece Bolt shroud Trigger pins Integral rail and recoil lug
16990 18947 4 NOK
100035998
LA Deviant Hunter Action .750 Bolt Face Lapua Cartridges
18947 NOK 0 kr 18 947,00 *

Kan restnoteres
Spesifikasjoner: Action Type: Long Finish: Stainless Steel

Vilkår for kjøp

  • USA eksportregler gjelder Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.



    This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
  • Krav til kjøpetillatelse. (Original kjøpetillatelse må sendes pr post og være mottatt før ordre sendes.)

Attributes

Action Type: Long Finish: Stainless Steel

Elementdetaljer

Made in USA
ECCN: I(g)




100036220
LA Deviant Hunter Action .545 Bolt Face Magnum Cartridge
17666 NOK 0 kr 17 666,00 *

Kan restnoteres
Spesifikasjoner: Action Type: Long Finish: Stainless Steel
100035997
LA Deviant Hunter Action .545 Bolt Face Magnum Cartridges
17666 NOK 2 kr 17 666,00 *

2 på lager
Spesifikasjoner: Action Type: Long Finish: Stainless Steel
100035999
Medium Deviant Hunter Action.480 Bolt Face.308 Family Cart
16990 NOK 0 kr 16 990,00 *

Kan restnoteres
Spesifikasjoner: Action Type: Medium Finish: Stainless Steel
The ultimate precision hunter action, we designed the all-steel Deviant Hunter with an integral scope base narrowed in the center to allow top loading of BDL style magazines and remove weight while maintaining rigidity. It has one scope ring slot in the rear and four in the front. The Deviant Hunter Actions come in the following configurations: Long Action Magnum Deviant Hunter with .545 Bolt Face to be used with hinge floor plates. RUM style feed lips for use with Wyatt's Ultra Mag Internal box magazines.  Designed for cartridges such as the 26, 28, & 30 Nosler, 300 PRC, Remington Ultra Magnum Cartridges. Long Action with .595 Bolt Face for use with Rigby length Internal box magazines. Designed for cartridges such as the 338 Lapua, 416 Rigby, 300 & 338 Norma and the 378 Weatherby based cartridges Medium Length Standard Action with .408 Bolt Face. For use with Wyatt .308 length Internal box magazines.  Designed for cartridges such as the .243, 6.5 Creedmoor, 6 Creedmoor, .308. Long Action Magnum with .545 Bolt Face for use with hinged floorplates. Remington style feed lips for use with Wyatt's Internal box magazines.  Designed for the Winchester Magnum family of Cartridges. Receiver made of pre-hardened aircraft certified 416 Stainless steel One-piece bolt made of pre-hardened aircraft certified 4340 Chrome moly Receiver barrel threads are 1.0625” X 16 T.P.I. (Rem. 700 thread dia. And pitch) 20 MOA scope mount, narrowed in the center to allow top loading of BDL style magazines and remove weight while maintaining rigidity. One slot in the rear and four in the front Integral recoil lug Works with hinged floorplates, detachable magazines or single shots Medium length (Rem. SA) offered with AW magazine cut Actions available in Medium, XM, and Long lengths to accommodate most popular factory chamberings and extended length hand loads Average configuration weighs 30 – 32 oz. depending on length Everything Included: Receiver body Repeater or single-shot style magazine cut Bolt stop/side bolt release, spring, pin One-piece bolt Bolt fluting (option not available on control-round feed) Extractor Bolt knob Firing pin/spring Cocking piece Bolt shroud Trigger pins Integral rail and recoil lug