Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

WILCOX INDUSTRIES
COMP-M MOUNT

100004257
Strong, Lightweight, Tactical Mount For Secure Attachment Of Comp Series Sights
Compact tactical mount securely positions an Aimpoint red dot optic the correct height above a flattop receiver rail. Fits Aimpoint CompC3/M2/ML2/M3/ML3 series, 3XMAG magnifier, and other optics with 30mm tube that require single-ring mounting. Skeletonized construction provides full support without the weight of excess metal for an exceptionally strong, solid, yet lightweight mount. Four, steel, hex-head cap screws anchor the top ring half to the mount to ensure full contact with sight body to prevent slippage. Rail Grabber clamping system secures the mount to receiver and maintains sight alignment even under the battering of sustained rapid fire. Unique, captive cross-bolt is divided lengthwise; one side provides a slop-free fit in a MIL-STD 1913 Picatinny slot, while rotating the bolt a half turn exposes the side that snugs into the narrower Weaver-type slot. An oversized thumb nut with deep grasping grooves lets the operator tighten the mount with hand pressure only; coin slot in the head lets you apply additional tightening force with a U.S. nickel or quarter.

SPECS: Aluminum, hardcoat anodized, matte black finish. Height measured from top of rail to bottom of scope tube: 1.120” (2.84cm). 3.1 oz. (88g) weight. Fits Aimpoint CompC3/M2/ML2/M3/ML3, 3XMAG magnifier, and other optics that require a single 30mm ring mount.

0 0 1 NOK
Produktnr.: 100004257
WILCOX INDUSTRIES AIMPOINT COMP-M MOUNT
Produsentnr.: 13600G01 Kompakt taktisk montasje som sikkert posisjonerer et Aimpoint rødpunktsikte i riktig høyde over en flattop mottaker-skinne. Passer til Aimpoint CompC3/M2/ML2/M3/ML3 serien, 3XMAG forstørrelsesglass, og andre optikk med 30mm tube som krever montering med enkel ring. Skjelett-konstruksjon gir full støtte uten vekten av overflødig metall for en eksepsjonelt sterk, solid, men lett montasje. Fire, stål, sekskantet hode skruebolter fester den øvre ringdelen til montasjen for å sikre full kontakt med siktekroppen for å forhindre glidning. Rail Grabber klemmesystem sikrer montasjen til mottakeren og opprettholder siktjustering selv under påkjenningen av vedvarende hurtig ild. Unik, fangende tverrbolt er delt på langs; den ene siden gir en spillfri passform i en MIL-STD 1913 Picatinny-spor, mens en halv omdreining av bolten eksponerer siden som passer inn i den smalere Weaver-typen spor. En stor tommel mutter med dype gripekanter lar operatøren stramme montasjen kun med håndtrykk; myntspor i hodet lar deg bruke ytterligere strammekraft med en amerikansk nikkel eller kvartal.
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Finish: Matte Black Height: 1.120'' Make: Universal Rifles Style: Picatinny

Attributes

Finish: Matte Black Height: 1.120'' Make: Universal Rifles Style: Picatinny Leveringsvekt: 0,068kg Frakthøyde: 43mm Fraktbredde: 51mm Fraktlengde: 104mm

Elementdetaljer

Made in USA




Strong, Lightweight, Tactical Mount For Secure Attachment Of Comp Series Sights
Compact tactical mount securely positions an Aimpoint red dot optic the correct height above a flattop receiver rail. Fits Aimpoint CompC3/M2/ML2/M3/ML3 series, 3XMAG magnifier, and other optics with 30mm tube that require single-ring mounting. Skeletonized construction provides full support without the weight of excess metal for an exceptionally strong, solid, yet lightweight mount. Four, steel, hex-head cap screws anchor the top ring half to the mount to ensure full contact with sight body to prevent slippage. Rail Grabber clamping system secures the mount to receiver and maintains sight alignment even under the battering of sustained rapid fire. Unique, captive cross-bolt is divided lengthwise; one side provides a slop-free fit in a MIL-STD 1913 Picatinny slot, while rotating the bolt a half turn exposes the side that snugs into the narrower Weaver-type slot. An oversized thumb nut with deep grasping grooves lets the operator tighten the mount with hand pressure only; coin slot in the head lets you apply additional tightening force with a U.S. nickel or quarter.

SPECS: Aluminum, hardcoat anodized, matte black finish. Height measured from top of rail to bottom of scope tube: 1.120” (2.84cm). 3.1 oz. (88g) weight. Fits Aimpoint CompC3/M2/ML2/M3/ML3, 3XMAG magnifier, and other optics that require a single 30mm ring mount.

Nyhetsbrev