Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 2500

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

CYLINDER & SLIDE
BROWNING HI-POWER HAMMER, SEAR & SPRING SET

000000002813 206000013

Premium Components For A Smooth, Crisp, Trigger Pull

Four-piece, target set allows precise fitting for sear engagement to greatly improve trigger feel and function. All sets include a long lasting, heat-treated, CNC-machined sear; 21 lb., reduced-power, hammer spring; factory-weight, firing pin spring and premium, commander-style hammer for no-bite, shooting comfort. CS281 features a standard, round spur hammer with narrow, chamfered edges to eliminate slide drag. CS285 have new, No-Bite, chamfered, ring hammer with deep, contoured back for less weight and reduced lock time. Hardened, tool steel sear replaces the factory, cast part; polishes easily and holds its angles for thousands of rounds. Gunsmith fitting recommended.

SPECS: Hammer - 4140 chrome moly, carbon steel; blue finish. Rc 50-53. Sear - Tool steel, in-the-white. Rc 50-53. Hammer Spring - 21 lb. (9.5 kg) reduced power, factory is 32 lb. (14.5 kg). Firing Pin Spring - Standard weight. Fits Browning Hi-Power 9mm and .40 S&W.

Mer...

Premium Komponenter For En Glatt, Skarp, Avtrekker

Fire-delt, målrettet sett som tillater presis tilpasning for sear-engasjement for å betydelig forbedre avtrekkerfølelse og funksjon. Alle sett inkluderer en varig, varmebehandlet, CNC-maskinert sear; 21 lb., redusert-kraft, hammerfjær; fabrikkvekt, tennstiftfjær og premium, commander-stil hammer for komfortabel skyting uten biting. CS281 har en standard, rund sporehammer med smale, avfasede kanter for å eliminere slepedrag. CS285 har en ny, No-Bite, avfaset, ringhammer med dyp, konturert bakside for mindre vekt og redusert låsetid. Herdet, verktøystål sear erstatter fabrikkens støpte del; poleres enkelt og holder vinklene i tusenvis av skudd. Våpensmed tilpasning anbefales.

SPECS: Hammer - 4140 krommolybden, karbonstål; blå finish. Rc 50-53. Sear - Verktøystål, ubehandlet. Rc 50-53. Hammerfjær - 21 lb. (9,5 kg) redusert kraft, fabrikken er 32 lb. (14,5 kg). Tennstiftfjær - Standard vekt. Passer Browning Hi-Power 9mm og .40 S&W.

Mer...

Kundevurderinger for CYLINDER & SLIDE MODEL CS281, STANDARD, BLUE

Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 3,8

Wonderful product~ but ! (21.12.2011)

When this product says gunsmith installation "recommended", you should read gunsmith "required". If you are a novice, be forewarned that this set, or any others require some finite tuning. The sear on my set was not even close to fitting the hammer shelf well~ if this had been installed 'as is'~ this would have been a full auto Browning ! Major stoning was required to mate the hammer to the sear, and even after that was done, some refining was required to the safety geometry to get the safety to engage in both 'half-cocked' and 'full-cocked'. In the end~ it created a no slack/no creep and very crisp trigger pull with a significantly reduced locktime. Well done C&S !!!!

Well worth the money (21.08.2014)

My comment would be basically the same as Jim B's. These parts require the services of a knowledgeable gunsmith to install them, but it's well worth the cost. My gunsmith tried to do a trigger job with the original hammer and sear, but they wouldn't hold an edge. He replaced them with these parts, and not only is hammer bite largely a thing of the past, I've got the cleanest Hi Power trigger I've ever experienced, breaking right at 4.0 lbs like I asked.

21 lbs is too low (26.08.2017)

The hammer and sear themselves are great. Look good and are clear improvements in quality and function.

However, the mainspring/hammer spring that are supplied with these kits is way too low. Every gunsmith and hi-fan I have talked to has told me that the 21 lbs main spring is so low that it can cause problems with frame battering.

Also, even C&S told me that under no circumstances use +P ammo and to avoid even foreign produced ammo because it's a little more hot than SAAMI specs. Moreover, they told me that you MUST use a heavier 18.5 lbs recoil spring to keep slide velocities in spec.

I have shot my gun with these parts using the heavier recoil spring and it functions well. However, I am so gravely concerned with the long term effects on the frame that I going to increase the weight of the hammer spring.

C&S makes this kit, but with a heavier mainspring. Buy that one and avoid my mistake.

Well made, fits well (21.06.2013)

Hammer and sear dropped in to my HP practical, the only work required was to refit the safety to the new parts. If you've fit a safety on a 1911, it's no big deal, if you haven't take it to your local pistolsmith to install. Trigger pull is much improved, but this was helped by removing the mag disconnect at the same time. There's room to make it better by stoning the sear for less engagement as they have left lots, probably to ensure safe fitting across the board. The main thing is, my HP no longer draws blood when i shoot it.

Les 4 flere anmeldelser fra brownells.com

2599 2599 2 NOK

Produktnr.: 206000013
CYLINDER & SLIDE MODEL CS281, STANDARD, BLUE
Produsentnr.: CS0281 000000002813 Fire-delt, målrettet sett som tillater presis tilpasning for sear-engasjement for å betydelig forbedre avtrekkerfølelse og funksjon. Alle sett inkluderer en varig, varmebehandlet, CNC-maskinert sear; 21 lb., redusert-kraft, hammerfjær; fabrikkvekt, tennstiftfjær og premium, commander-stil hammer for komfortabel skyting uten biting. CS281 har en standard, rund sporehammer med smale, avfasede kanter for å eliminere slepedrag. CS285 har en ny, No-Bite, avfaset, ringhammer med dyp, konturert bakside for mindre vekt og redusert låsetid. Herdet, verktøystål sear erstatter fabrikkens støpte del; poleres enkelt og holder vinklene i tusenvis av skudd. Våpensmed tilpasning anbefales.

2599 NOK 0 kr 2 599,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Make: Browning Modell: High Power

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Fire-delt sett som forbedrer avtrekkerfølelsen og funksjonen ved presis tilpasning for sear-engasjement.
Inkluderer varig, varmebehandlet sear, redusert-kraft hammerfjær, standard tennstiftfjær og commander-stil hammer for komfortabel skyting.
Passer Browning Hi-Power 9mm og .40 S&W, og våpensmed tilpasning anbefales for optimal ytelse.

Attributes

Make: Browning Modell: High Power Leveringsvekt: 0,023kg Frakthøyde: 15mm Fraktbredde: 102mm Fraktlengde: 160mm UPC : 000000002813

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c

Produktnr.: 206000017
CYLINDER & SLIDE MODEL CS285, NO-BITE, BLUE
Produsentnr.: CS0285 000000002851 Fire-delt, målrettet sett som tillater presis tilpasning for sear-engasjement for å betydelig forbedre avtrekkerfølelse og funksjon. Alle sett inkluderer en varig, varmebehandlet, CNC-maskinert sear; 21 lb., redusert-kraft, hammerfjær; fabrikkvekt, tennstiftfjær og premium, commander-stil hammer for komfortabel skyting uten biting. CS281 har en standard, rund sporehammer med smale, avfasede kanter for å eliminere slepedrag. CS285 har en ny, No-Bite, avfaset, ringhammer med dyp, konturert bakside for mindre vekt og redusert låsetid. Herdet, verktøystål sear erstatter fabrikkens støpte del; poleres enkelt og holder vinklene i tusenvis av skudd. Våpensmed tilpasning anbefales.

2599 NOK 0 kr 2 599,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Make: Browning Modell: High Power

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Presisjonssett som forbedrer avtrekkerfølelse og funksjon, inkludert CNC-maskinert sear og redusert-kraft hammerfjær.
CS285 har en No-Bite, avfaset, ringhammer som gir mindre vekt og redusert låsetid.
Passer Browning Hi-Power 9mm og .40 S&W, med anbefaling om våpensmed tilpasning for optimal ytelse.

Attributes

Make: Browning Modell: High Power Leveringsvekt: 0,045kg Frakthøyde: 18mm Fraktbredde: 109mm Fraktlengde: 178mm UPC : 000000002851