Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS BRN-10 UPPER RECEIVER BUILDER'S SET


Upper w/ 20 Fluted Rifle Bbl, Flash Hider& Slip Ring Assy

Introducing the Brownells BRN-10®Upper Receiver Builder’s Kit! The Builder’s Kit’s feature the BRN-10® Upper Receiver, The BRN-10® Retro 3 Prong Flash Hider, BRN-10® Retro Slip Ring Assembly, and your choice of a variety of AR . Mer...

Produktnr.: 100038704 100038704
Introducing the Brownells BRN-10®Upper Receiver Builder’s Kit! The Builder’s Kit’s feature the BRN-10® Upper Receiver, The BRN-10® Retro 3 Prong Flash Hider, BRN-10® Retro Slip Ring Assembly, and your choice of a variety of AR .308 Barrels. The receiver includes the proprietary BRN-10® parts, such as the rear sight assembly and charging handle.  Any standard SR-25/DPMS pattern bolt carrier group and barrel assembly will interface fine with the BRN-1®0 upper.  The receiver is machined from 7075-T6 aluminum and anodized matte black. The BRN-10® Upper Receiver only fits the BRN-10® Lower Receiver.  It is not compatible with other 308 pattern receivers. The BRN-10 Open 3-Prong model replicates the hider found on Sudanese and early Dutch .308 ARs. Machined carbon steel Durable, hard black QPQ finish 5/8"-24 thread pitch Clearance hole: .320" - excellent for .308 rifles, as well as .243 Winchester, 6.5mm Creedmoor, etc. Our Brownells BRN-10 Retro Slip Ring replicates the contour of the slip rings used on early M16 rifles, so it’ll add an extra touch of period authenticity to your next "retro" AR-style .308 build. Just combine the BRN-10 slip ring with a .308 barrel nut, handguard spring, and snap ring to add the correct handguard retention hardware to your barrel. The “flat” exterior of the Brownells BRN-10 Retro Slip Ring enables the use of non-free-float drop-in handguards on your .308 AR. Aluminum construction Flat exterior, no taper like modern delta rings Fits DPMS and Armalite® pattern rifles Many AR aficionados love their AR-15 platforms and want to build retro models, but a little-known fact about the AR platform is that the earliest rifle models were actually AR-10® chambered in .308 Win. The Brownells Original Style BRN-10 308 AR Barrels are faithful reproduction of the barrels found on the first Armalite® AR-10® rifles produced in the 1950s. The Brownells Original Style BRN-10 308 AR barrels are available in two different configurations never seen before on the retro reproduction market. The fluted model allows builders to construct repros of early test models provided to the U.S. Army in the late '50s, while the lightweight-profile model emulates the barrel design used on AR-10® models sold to the Dutch and Portuguese militaries. Barrel length: 20 inches Rifle-length gas system Weight: 2.5 pounds Twist rate: 1:10 The barrels are QPQ-nitride finished and feature an accurate phosphate exterior finish. The barrels come with a barrel nut, round handguard cap, front sight base and front sight hardware. The Brownells AR 308 Carbine Barrel enables you to give your DPMS pattern 308 a lighter, more compact barrel for faster handling in close quarters. You can swap out your rifle's existing barrel, build a new AR-308 carbine from scratch, OR just install it on a modern AR-308 upper to get a lightweight, maneuverable carbine that packs .308 a punch. Each AR 308 Carbine Barrel comes with the same gas block / front sight base as our BRN-10™ rifles. It's based on the original Sudanese-type front sight found on AR-10® rifles produced by the Dutch company Artillerie Inrichtingen under license from Armalite®. The good news is your barrel arrives with the front sight base installed, along with the barrel nut, handguard cap, and side-mounted sling swivel, making the barrel swap process easy and fast. The AR 308 Carbine Barrel comes with AR-308 standard 5/8""-24 tpi muzzle threads that'll accept just about any readily available .30 caliber flash hider, compensator, or muzzle brake. Available in 16" (mid-length gas system), 18", and 20” (rifle gas systems) lengths Made of extra-hard 4150 carbon steel .308 Winchester chamber 1-10" rifling Front sight base / gas block, barrel nut, handguard cap & sling swivel installed Barrel nut fits standard AR-15 wrench Tough anti-corrosion Nitride finish with a Parkerized topcoat (excellent match to Brownells Retro Rifle™ receivers) Produced for Brownells by Faxon Firearms
BROWNELLS
8884 9999 6 NOK
New
100038704
Upper w/ 20 Fluted Rifle Bbl, Flash Hider& Slip Ring Assy
9499 NOK 93 kr 9 499,00 *

10+ på lager
Spesifikasjoner: Cartridge: 308 Winchester Contour: Fluted Finish: Black Length: 20 Make: AR .308, Brownells Model: BRN-10 Twist: 1-10

Vilkår for kjøp

  • Krav til kjøpetillatelse eller våpenkort og legitimasjon dersom kjøper har våpen i samme kaliber. (Original kjøpetillatelse må sendes pr post. Ordre blir ikke effekturert før kjøpetillatelse eller annen dokumentasjon foreligger))

Attributes

Cartridge: 308 Winchester Contour: Fluted Finish: Black Length: 20 Make: AR .308,Brownells Model: BRN-10 Twist: 1-10

Elementdetaljer

Made in USA
ECCN: EAR99




New
100038703
Upper w/ 16 Mid-Length Barrel, Flash Hider&Slip Ring Assy
9273 NOK 93 kr 9 273,00 *

10+ på lager
Spesifikasjoner: Cartridge: 308 Winchester Finish: Black Length: 16 Make: AR .308, Brownells Model: BRN-10 Twist: 1-10
New
100038702
Upper w/ 18 Carbine Barrel, Flash Hider, & Slip Ring Assy
9099 NOK 93 kr 9 099,00 *

10+ på lager
Spesifikasjoner: Cartridge: 308 Winchester Contour: Carbine Finish: Black Length: 18 Make: AR .308, Brownells Model: BRN-10 Twist: 1-10
New
100038701
Upper w/ 20 Barrel, Flash Hider, & Slip Ring Assy
9999 NOK 93 kr 9 999,00 *

10+ på lager
Spesifikasjoner: Cartridge: 308 Winchester Finish: Black Length: 20 Make: AR .308, Brownells Model: BRN-10 Twist: 1-10
New
100038700
Upper w/ 20 LW Barrel, FlashHider & Slip Ring Assy
9499 NOK 93 kr 9 499,00 *

10+ på lager
Spesifikasjoner: Cartridge: 308 Winchester Finish: Black Length: 20 Make: AR .308, Brownells Model: BRN-10 Twist: 1-10
New
100038705
Upper w/ 20 LW Rifle Barrel, Flash Hider & Slip Ring Assy
8884 NOK 93 kr 8 884,00 *

10+ på lager
Spesifikasjoner: Cartridge: 308 Winchester Finish: Black Length: 20 Make: AR .308, Brownells Model: BRN-10 Twist: 1-10
Introducing the Brownells BRN-10®Upper Receiver Builder’s Kit! The Builder’s Kit’s feature the BRN-10® Upper Receiver, The BRN-10® Retro 3 Prong Flash Hider, BRN-10® Retro Slip Ring Assembly, and your choice of a variety of AR .308 Barrels. The receiver includes the proprietary BRN-10® parts, such as the rear sight assembly and charging handle.  Any standard SR-25/DPMS pattern bolt carrier group and barrel assembly will interface fine with the BRN-1®0 upper.  The receiver is machined from 7075-T6 aluminum and anodized matte black. The BRN-10® Upper Receiver only fits the BRN-10® Lower Receiver.  It is not compatible with other 308 pattern receivers. The BRN-10 Open 3-Prong model replicates the hider found on Sudanese and early Dutch .308 ARs. Machined carbon steel Durable, hard black QPQ finish 5/8"-24 thread pitch Clearance hole: .320" - excellent for .308 rifles, as well as .243 Winchester, 6.5mm Creedmoor, etc. Our Brownells BRN-10 Retro Slip Ring replicates the contour of the slip rings used on early M16 rifles, so it’ll add an extra touch of period authenticity to your next "retro" AR-style .308 build. Just combine the BRN-10 slip ring with a .308 barrel nut, handguard spring, and snap ring to add the correct handguard retention hardware to your barrel. The “flat” exterior of the Brownells BRN-10 Retro Slip Ring enables the use of non-free-float drop-in handguards on your .308 AR. Aluminum construction Flat exterior, no taper like modern delta rings Fits DPMS and Armalite® pattern rifles Many AR aficionados love their AR-15 platforms and want to build retro models, but a little-known fact about the AR platform is that the earliest rifle models were actually AR-10® chambered in .308 Win. The Brownells Original Style BRN-10 308 AR Barrels are faithful reproduction of the barrels found on the first Armalite® AR-10® rifles produced in the 1950s. The Brownells Original Style BRN-10 308 AR barrels are available in two different configurations never seen before on the retro reproduction market. The fluted model allows builders to construct repros of early test models provided to the U.S. Army in the late '50s, while the lightweight-profile model emulates the barrel design used on AR-10® models sold to the Dutch and Portuguese militaries. Barrel length: 20 inches Rifle-length gas system Weight: 2.5 pounds Twist rate: 1:10 The barrels are QPQ-nitride finished and feature an accurate phosphate exterior finish. The barrels come with a barrel nut, round handguard cap, front sight base and front sight hardware. The Brownells AR 308 Carbine Barrel enables you to give your DPMS pattern 308 a lighter, more compact barrel for faster handling in close quarters. You can swap out your rifle's existing barrel, build a new AR-308 carbine from scratch, OR just install it on a modern AR-308 upper to get a lightweight, maneuverable carbine that packs .308 a punch. Each AR 308 Carbine Barrel comes with the same gas block / front sight base as our BRN-10™ rifles. It's based on the original Sudanese-type front sight found on AR-10® rifles produced by the Dutch company Artillerie Inrichtingen under license from Armalite®. The good news is your barrel arrives with the front sight base installed, along with the barrel nut, handguard cap, and side-mounted sling swivel, making the barrel swap process easy and fast. The AR 308 Carbine Barrel comes with AR-308 standard 5/8""-24 tpi muzzle threads that'll accept just about any readily available .30 caliber flash hider, compensator, or muzzle brake. Available in 16" (mid-length gas system), 18", and 20” (rifle gas systems) lengths Made of extra-hard 4150 carbon steel .308 Winchester chamber 1-10" rifling Front sight base / gas block, barrel nut, handguard cap & sling swivel installed Barrel nut fits standard AR-15 wrench Tough anti-corrosion Nitride finish with a Parkerized topcoat (excellent match to Brownells Retro Rifle™ receivers) Produced for Brownells by Faxon Firearms