Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

BROWNELLS
BLANK SLIDE FOR GEN3 GLOCK® 17 STAINLESS

050806112629 078200005

A "Blank Canvas" for Your Next Custom Pistol Masterpiece

Brownells Blank Slides for Glock® pistols come with the exterior left smooth and featureless so you can customize it exactly the way you want it. Add cocking serrations, an optic mounting slot, and cosmetic flourishes to make it entirely your own. (Yes, you will need to bring some machining skills to the table!) Inside, the dimensions fully machined to factory dimensions, so your Brownells Blank Slide for Glock comes ready to fit a factory-spec frame and accept Gen 3 factory and aftermarket barrels and parts. Models for Gen3 Glock® 17 Machined from firearm-grade 17-4 stainless steel Heat treated to 41-44 on the Rockwell C scale Comes "in-the-white" so you can apply the finish of your choice Includes Glock factory front and rear sight dovetails Sometimes "off the shelf" works, sometimes you want to do it your way. When you’re ready to build your own Glock®-platform Dream Gun™, reach for a Brownells Blank Slide. Channel liner required for these slides. Channel liners are a press fit and require a tool to install.

Mer...

Et "Blankt Lerret" for Ditt Neste Tilpassede Pistolmesterverk

Brownells blanke slæder for Glock®-pistoler leveres med et glatt og funksjonsløst ytre slik at du kan tilpasse det akkurat slik du ønsker. Legg til ladegrep, en monteringsspor for optikk og dekorative detaljer for å gjøre den helt din egen. (Ja, du må ha noen maskineringsferdigheter på plass!) Innsiden er fullstendig maskinert til fabrikkdimensjoner, så din Brownells blanke slæde for Glock er klar til å passe en fabrikk-spesifikk ramme og akseptere Gen 3 fabrikk- og ettermarkedsløp og deler. Modeller for Gen3 Glock® 17 Maskinert fra våpengradert 17-4 rustfritt stål Varmebehandlet til 41-44 på Rockwell C-skalaen Leveres "i det hvite" slik at du kan påføre den finishen du foretrekker Inkluderer Glock fabrikk front- og baksiktespor Noen ganger fungerer "fra hyllen", andre ganger vil du gjøre det på din måte. Når du er klar til å bygge din egen Glock®-plattform Dream Gun™, ta for deg en Brownells blank slæde. Kanalfôr kreves for disse slædene. Kanalfôr er presspasset og krever et verktøy for å installere.

Mer...

Kundevurderinger for BROWNELLS BLANK SLIDE FOR GEN3 GLOCK 17 STAINLESS

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,9

Unfortunate Issues (22.10.2017)

Unfortunately I have had no success with this slide. Something appears to be off with the geometry of the portion of the slide that resets at the connector. It hangs up and will not allow the trigger to reset. I have swapped connectors, frames with know good ones, entire slides, all internals. The issue follows the slide. Upon comparison to a known good slide, the profile is different. Wish it weren't a problem but I cannot get it to work no matter how much fitting I try to do. This is the last week I will work on it before throwing in the towel after 3 months of labor and many many parts to diagnosis the issue. The issues I see are firing out of battery, light primer strikes, and trigger not resetting.

Unfortunately, I cannot and will not recommend this slide. Everything else about it has been great, but it does not function. I will continue to usebtge many excellent brownells products available, but this is not one of those products.

AMAZING! (10.12.2017)

I ordered this slide for my PF940c build the first week Brownells introduced this slide. Initial inspection revealed great, clean machine work! Sent my slide off to Primary Machine and had it some serrations cut & cerakote burnt bronze. I absolute the end results! Finished off this slide with a Brownells Victory First barrel, slide completion kit and I will be installing WOTG sights.

I can't wait until these slides are back in stock...I will order one as soon as they become available.

***Brownells...if you can include a channel liner, that would be FANTASTIC***

Donât forget a firing pin channel liner (01.02.2018)

Donât forget to install s firing pin channel liner or you will have light primer strikes and trigger reset issues,

Good basic G-Lock slide (17.03.2018)

Ordered for a Pylomer80 compact build. About the most economical slide on the market. Punched 30 rounds through. Some slide hang up issues. But that should free up as soon as the great frozen North warms up come spring and I go to the gun range with out freezing solid. Also hard to rack with out slide serrations. That taken care of once the Clausing 8520 mill is running.

Response to the 1 star review. (18.04.2018)

I actually purchased the G17 variant; however, as a 20 plus year Glock Certified Armorer, I would say with a very high degree of confidence that the reviewer who gave the slide a one star review claiming all of the issues with tolerance etc. failed to install a firing pin channel liner. A common mistake for those who think they know, but havenât been trained on how to properly disassemble and assemble a Glock from parts. The slide has impeccable machining, all stock parts and many quality after market parts fit and function as they should. This is a real bargain if you are planning on having aesthetic machining done to your Glock slide without carving on your stock one.

Would be great if the plunger fit (20.04.2018)

I'm an amateur Glock P80 builder. The safety plunger hole was drilled too small. I don't own a machine that can fix this. I tried a Glock OEM plunger and an aftermarket plunger, neither one fit. Other than that, the slide seems pretty well made but that doesn't matter to me because I can't use it.

Fantastic slide and great value. (18.04.2018)

Impeccable machining, fit and finish. All stock and most quality aftermarket parts will fit and function properly. A fantastic economical option if you are planning on having custom aesthetic machining work done on your Glock without carving up your stock slide. Do not forget that it will need a firing pin channel liner as it seems one reviewer of the G19 variant did and then posted a poor review. You will not be disappointed!

Les 7 flere anmeldelser fra brownells.com

0 0 1 NOK

Produktnr.: 078200005
BROWNELLS BLANK SLIDE FOR GEN3 GLOCK 17 STAINLESS
Produsentnr.: NONE 050806112629 Brownells blanke slæder for Glock®-pistoler leveres med et glatt og funksjonsløst ytre slik at du kan tilpasse det akkurat slik du ønsker. Legg til ladegrep, en monteringsspor for optikk og dekorative detaljer for å gjøre den helt din egen. (Ja, du må ha noen maskineringsferdigheter på plass!) Innsiden er fullstendig maskinert til fabrikkdimensjoner, så din Brownells blanke slæde for Glock er klar til å passe en fabrikk-spesifikk ramme og akseptere Gen 3 fabrikk- og ettermarkedsløp og deler. Modeller for Gen3 Glock® 17 Maskinert fra våpengradert 17-4 rustfritt stål Varmebehandlet til 41-44 på Rockwell C-skalaen Leveres "i det hvite" slik at du kan påføre den finishen du foretrekker Inkluderer Glock fabrikk front- og baksiktespor Noen ganger fungerer "fra hyllen", andre ganger vil du gjøre det på din måte. Når du er klar til å bygge din egen Glock®-plattform Dream Gun™, ta for deg en Brownells blank slæde. Kanalfôr kreves for disse slædene. Kanalfôr er presspasset og krever et verktøy for å installere.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Cartridge: 9 mm Luger Finish: Unfinished Make: Glock Modell: 17 Sights: Dovetail Style: Blank

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Vilkår for kjøp

Krav til kjøpetillatelse. (Original kjøpetillatelse må sendes pr post og være mottatt før ordre sendes.)

Attributes

Cartridge: 9 mm Luger Finish: Unfinished Make: Glock Modell: 17 Sights: Dovetail Style: Blank Leveringsvekt: 0,376kg Frakthøyde: 38mm Fraktbredde: 64mm Fraktlengde: 178mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

A "Blank Canvas" for Your Next Custom Pistol Masterpiece

Mer...

Et "Blankt Lerret" for Ditt Neste Tilpassede Pistolmesterverk

Mer...

Kundevurderinger for BROWNELLS BLANK SLIDE FOR GEN3 GLOCK 17 STAINLESS

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,9

Unfortunate Issues (22.10.2017)

AMAZING! (10.12.2017)

Donât forget a firing pin channel liner (01.02.2018)

Donât forget to install s firing pin channel liner or you will have light primer strikes and trigger reset issues,

Good basic G-Lock slide (17.03.2018)

Response to the 1 star review. (18.04.2018)

Would be great if the plunger fit (20.04.2018)

Fantastic slide and great value. (18.04.2018)

Les 7 flere anmeldelser fra brownells.com

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.