Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
810033781773 100023896
Minimal Weight, Minimal Bulk Accessory Mounting Platform
Battle Arms Development’s Rigidrail M-LOK Handguard is designed to give you just the right balance between weight, strength, and accessory mounting versatility. Its open, skeletonized configuration enables fast, thorough dissipation of barrel heat, even during long rapid-fire operations (but you’ll probably want to wear gloves!). M-LOK slots at 3, 6, 9 and 12 o’clock positions open up plenty of accessory mounting options. Short Picatinny rail sections positioned along the top at the front and rear give you mounting points for backup sights or other accessories. The Battle Arms Development Rigidrail M-LOK Handguard allows the barrel to free-float, so it will not apply any accuracy-compromising stress to the barrel. Machined 6061 T6 aluminum construction for superb strength - Tough, non-reflective hardcoat anodized finish for added surface strength Four (front/rear pairs on each side) anti-rotational QD sling swivel sockets Comes with proprietary nut (wrench included) machined from extra-strong 7075 aluminum Bronze barrel nut finish provides a unique visual contrast visible through the Rigidrail’s open latticework No barrel nut shims required With a generous 1.315" I.D., the Battle Arms Development Rigidrail M-LOK Handguard has clearance for most low-profile gas blocks and will not make contact with the gas tube. It even has a tapped hole at the 6 o'clock position on the forward underside for mounting a bipod or additional sling attachment point.
0 0 1 NOK
Produktnr.: 100023896
BATTLE ARMS DEVELOPMENT INC. RIGID RAIL 15" HANDGUARD M-LOK
Produsentnr.: BADRR15MLOK 810033781773 Battle Arms Development sitt Rigidrail M-LOK Handguard er designet for å gi deg den rette balansen mellom vekt, styrke og fleksibilitet for montering av tilbehør. Den åpne, skjelettaktige konfigurasjonen muliggjør rask og grundig avledning av løpsvarme, selv under lange skytesekvenser med hurtig ild (men du vil sannsynligvis ønske å bruke hansker!). M-LOK spor ved 3, 6, 9 og 12-timers posisjoner åpner for mange muligheter for tilbehørsmontering. Korte Picatinny-skinne seksjoner plassert langs toppen foran og bak gir deg monteringspunkter for backup sikter eller annet tilbehør. Battle Arms Development Rigidrail M-LOK Handguard lar løpet flyte fritt, slik at det ikke vil påføre noen nøyaktighetsreduserende stress på løpet. Maskinert 6061 T6 aluminiumskonstruksjon for enestående styrke - Tøff, ikke-reflekterende hardcoat anodisert finish for økt overflate styrke Fire (foran/bak par på hver side) anti-rotasjons QD slynge svingfester Leveres med proprietær mutter (nøkkel inkludert) maskinert fra ekstra sterk 7075 aluminium Bronsefarget mutterfinish gir en unik visuell kontrast synlig gjennom Rigidrails åpne gitterverk Ingen mutterskiver nødvendig Med en generøs 1.315" I.D., har Battle Arms Development Rigidrail M-LOK Handguard nok plass for de fleste lavprofil gassblokker og vil ikke komme i kontakt med gassrøret. Den har til og med et tappet hull ved 6-timers posisjonen på den fremre undersiden for montering av en tofot eller ekstra slyngefestepunkt.
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Farge: Black Lengde: 15 Make: AR-15 Material: Aluminum Style: M-LOK Type: Free Float

Attributes

Farge: Black Length: 15 Make: AR-15 Material: Aluminum Style: M-LOK Type: Free Float Leveringsvekt: 0,499kg Frakthøyde: 89mm Fraktbredde: 89mm Fraktlengde: 419mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.y.1




Minimal Weight, Minimal Bulk Accessory Mounting Platform
Battle Arms Development’s Rigidrail M-LOK Handguard is designed to give you just the right balance between weight, strength, and accessory mounting versatility. Its open, skeletonized configuration enables fast, thorough dissipation of barrel heat, even during long rapid-fire operations (but you’ll probably want to wear gloves!). M-LOK slots at 3, 6, 9 and 12 o’clock positions open up plenty of accessory mounting options. Short Picatinny rail sections positioned along the top at the front and rear give you mounting points for backup sights or other accessories. The Battle Arms Development Rigidrail M-LOK Handguard allows the barrel to free-float, so it will not apply any accuracy-compromising stress to the barrel. Machined 6061 T6 aluminum construction for superb strength - Tough, non-reflective hardcoat anodized finish for added surface strength Four (front/rear pairs on each side) anti-rotational QD sling swivel sockets Comes with proprietary nut (wrench included) machined from extra-strong 7075 aluminum Bronze barrel nut finish provides a unique visual contrast visible through the Rigidrail’s open latticework No barrel nut shims required With a generous 1.315" I.D., the Battle Arms Development Rigidrail M-LOK Handguard has clearance for most low-profile gas blocks and will not make contact with the gas tube. It even has a tapped hole at the 6 o'clock position on the forward underside for mounting a bipod or additional sling attachment point.
Nyhetsbrev