Auto-oversatt beskrivelse (Beskrivelse - Produsent): Enkelt å montere snutebremser reduserer filtpåtrykk og munnstigning betydelig for mer komfortabel fotografering, bedre kontroll og raskere oppfølgingsbilder. Stengt nederst for å redusere støv signatur. Mer...
Easy to install muzzle brakes substantially reduce felt recoil and muzzle rise for more comfortable shooting, better control, and faster follow-up shots. Closed at the bottom to reduce dust signature. Recessed gas ports redirect combustion gases to counteract recoil force. Machined from the same high-grade 8620 steel bar stock as the popular Smith Enterprise Vortex Flash Eliminator series, and heat-treated to a surface hardness of Rc 60 to resist gas erosion. Rounded edges give a streamlined profile and minimize risk of snagging on other gear. 1002RR fits any rifle up to .308/7.62mm with 5/8"-24 tpi muzzle threads. Includes lock nut.
Enkelt å montere snutebremser reduserer filtpåtrykk og munnstigning betydelig for mer komfortabel fotografering, bedre kontroll og raskere oppfølgingsbilder. Stengt nederst for å redusere støv signatur. Innfelte gassporter omdirigerer forbrenningsgasser for å motvirke rekylkraften. Maskinert fra samme høykvalitets 8620 stålstangstamme som den populære Smith Enterprise Vortex Flash Eliminator-serien, og varmebehandlet til en overflatehardhet på Rc 60 for å motstå gasserosjon. Avrundede kanter gir en strømlinjeformet profil og minimerer risikoen for at det knagger på annet utstyr. 1002RR passer til alle rifler opp til 0,308 / 7,62mm med 5/8 "-24 tpi snute gjenger. Inkluderer låsemutter.
Kundevurderinger for Muzzle Brake .905 30 Caliber 5/8-24 SS Nitride
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,7
Extremely effective(22.11.2011)
Installed on a Bushmaster Mid-length .308, this brake brings felt recoil down to the level of a .30-30 (seriously), but the trade-off is that it is really LOUD, and you have to be careful about where you put stuff on the bench, lest it get blown off by the sideblast. I have also had one on a Springfield M1A, and even with its' steel buttplate, could shoot that rifle comfortably all day long. Muzzle climb with either rifle is almost nil. This is one of the most effective muzzle brake designs available, period.
Love this Brake(15.02.2012)
I installed this brake on a ruger scout 308, I am a small shooter, but I love to shoot. This brake took a gun that kicked and jumped hard because it's so light and tamed it down to where it is a joy to shoot. Bottom line, I would recommend this brake to anyone and I would buy it again.
THIS WORKS AND ITS NOT LOUD(17.09.2012)
I have a Remington R25 with a 20" Sporter weight barrel in 308. I figured being a semiauto would be reasonable on recoil like a Remington 7400. WRONG! The heavy bolt carrier flies back creating a momentum issue the makes the barrel flie off high and left. If I didn't do something I would have went back to a bolt gun. Called the guys at Brownell's and they suggeted this break. I got the gun back from the Smith and shot it this morning. This brake turned this gun into a completely different animal. It now has the controlability of a AR15 without a brake which is totally acceptable. Quick followup shots are now performable were as they couldn't be done prior to the installation of the brake. I'd have to say that 75% of the recoil is gone as is the muzzle rise. AND its isn't any louder than it was before without the brake. If you need a 308 brake don't hestitate to buy this one. It solved my problem!
Awesome fit, finish and performance(05.01.2013)
I was very skeptical at first before I received or installed this on my Ruger Gunsite Scout .308. But, I must say, this muzzle brake is beautifully crafted with a nice finish, looks great on the Gunsite Scout rifle and really does perform. It really tamed the "Wild Beast" down considerably and makes shooting the .308 much more fun. Ruger should have this brake installed as factory equipment! Enough said!
EFFECTIVE!!!!!(22.04.2014)
Picked this up for my Mini-30(5854)more or less as an experiment to see how it would change its performance. Well, it worked. Group size was reduced from 5" to 2" @ 100 yds. Muzzle jump was eliminated. Able to shoot at running hogs and never lose my scope view. Recoil was minimal. Used to be able to shoot without hearing protection....better wear some now!!! But, for hunting it's a good trade off. Luv this thing...my neighbor put one on his Ruger Scout...he's in love. Get a couple of crush-washers to index properly.
Not as good as I expected(15.08.2014)
Reduces most rise recoil not so much.
Installed fairly easy on a Sig 556r.
Way better than the A2 style flash hider it came with.
Needs locktite
Found out my preffered brake is available in 7.62x39 with 5/8 24 tpi the day after I ordered it.
851000086 Muzzle Brake .905 30 Caliber 5/8-24 SS Nitride Produsentnr.: 1002RR Enkelt å montere snutebremser reduserer filtpåtrykk og munnstigning betydelig for mer komfortabel fotografering, bedre kontroll og raskere oppfølgingsbilder. Stengt nederst for å redusere støv signatur. Innfelte gassporter omdirigerer forbrenningsgasser for å motvirke rekylkraften. Maskinert fra samme høykvalitets 8620 stålstangstamme som den populære Smith Enterprise Vortex Flash Eliminator-serien, og varmebehandlet til en overflatehardhet på Rc 60 for å motstå gasserosjon. Avrundede kanter gir en strømlinjeformet profil og minimerer risikoen for at det knagger på annet utstyr. 1002RR passer til alle rifler opp til 0,308 / 7,62mm med 5/8 "-24 tpi snute gjenger. Inkluderer låsemutter.
Easy to install muzzle brakes substantially reduce felt recoil and muzzle rise for more comfortable shooting, better control, and faster follow-up shots. Closed at the bottom to reduce dust signature. Recessed gas ports redirect combustion gases to counteract recoil force. Machined from the same high-grade 8620 steel bar stock as the popular Smith Enterprise Vortex Flash Eliminator series, and heat-treated to a surface hardness of Rc 60 to resist gas erosion. Rounded edges give a streamlined profile and minimize risk of snagging on other gear. 1002RR fits any rifle up to .308/7.62mm with 5/8"-24 tpi muzzle threads. Includes lock nut.
Enkelt å montere snutebremser reduserer filtpåtrykk og munnstigning betydelig for mer komfortabel fotografering, bedre kontroll og raskere oppfølgingsbilder. Stengt nederst for å redusere støv signatur. Innfelte gassporter omdirigerer forbrenningsgasser for å motvirke rekylkraften. Maskinert fra samme høykvalitets 8620 stålstangstamme som den populære Smith Enterprise Vortex Flash Eliminator-serien, og varmebehandlet til en overflatehardhet på Rc 60 for å motstå gasserosjon. Avrundede kanter gir en strømlinjeformet profil og minimerer risikoen for at det knagger på annet utstyr. 1002RR passer til alle rifler opp til 0,308 / 7,62mm med 5/8 "-24 tpi snute gjenger. Inkluderer låsemutter.
Kundevurderinger for Muzzle Brake .905 30 Caliber 5/8-24 SS Nitride
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,7
Extremely effective(22.11.2011)
Installed on a Bushmaster Mid-length .308, this brake brings felt recoil down to the level of a .30-30 (seriously), but the trade-off is that it is really LOUD, and you have to be careful about where you put stuff on the bench, lest it get blown off by the sideblast. I have also had one on a Springfield M1A, and even with its' steel buttplate, could shoot that rifle comfortably all day long. Muzzle climb with either rifle is almost nil. This is one of the most effective muzzle brake designs available, period.
Love this Brake(15.02.2012)
I installed this brake on a ruger scout 308, I am a small shooter, but I love to shoot. This brake took a gun that kicked and jumped hard because it's so light and tamed it down to where it is a joy to shoot. Bottom line, I would recommend this brake to anyone and I would buy it again.
THIS WORKS AND ITS NOT LOUD(17.09.2012)
I have a Remington R25 with a 20" Sporter weight barrel in 308. I figured being a semiauto would be reasonable on recoil like a Remington 7400. WRONG! The heavy bolt carrier flies back creating a momentum issue the makes the barrel flie off high and left. If I didn't do something I would have went back to a bolt gun. Called the guys at Brownell's and they suggeted this break. I got the gun back from the Smith and shot it this morning. This brake turned this gun into a completely different animal. It now has the controlability of a AR15 without a brake which is totally acceptable. Quick followup shots are now performable were as they couldn't be done prior to the installation of the brake. I'd have to say that 75% of the recoil is gone as is the muzzle rise. AND its isn't any louder than it was before without the brake. If you need a 308 brake don't hestitate to buy this one. It solved my problem!
Awesome fit, finish and performance(05.01.2013)
I was very skeptical at first before I received or installed this on my Ruger Gunsite Scout .308. But, I must say, this muzzle brake is beautifully crafted with a nice finish, looks great on the Gunsite Scout rifle and really does perform. It really tamed the "Wild Beast" down considerably and makes shooting the .308 much more fun. Ruger should have this brake installed as factory equipment! Enough said!
EFFECTIVE!!!!!(22.04.2014)
Picked this up for my Mini-30(5854)more or less as an experiment to see how it would change its performance. Well, it worked. Group size was reduced from 5" to 2" @ 100 yds. Muzzle jump was eliminated. Able to shoot at running hogs and never lose my scope view. Recoil was minimal. Used to be able to shoot without hearing protection....better wear some now!!! But, for hunting it's a good trade off. Luv this thing...my neighbor put one on his Ruger Scout...he's in love. Get a couple of crush-washers to index properly.
Not as good as I expected(15.08.2014)
Reduces most rise recoil not so much.
Installed fairly easy on a Sig 556r.
Way better than the A2 style flash hider it came with.
Needs locktite
Found out my preffered brake is available in 7.62x39 with 5/8 24 tpi the day after I ordered it.