Auto-oversatt beskrivelse (Beskrivelse - Produsent): Slitesterk, korrosjons-, vær- og støtbestandig forsterket nylonkobling lar deg bære to 30-runde mags på våpenet ditt for supersnelle laster. Klemmer sikkerhetsmagasinet sikkert til det i pistolen for rask tilgang. Mer...
Clamps Together Two Polymer Magazines For Twice The Firepower At Your Fingertips
Durable, corrosion-, weather- and impact-resistant reinforced nylon coupler lets you carry two 30-round mags on your weapon for super-fast reloads. Securely clamps the backup magazine to the one in the gun for fast access. Steel cross-bolt provides plenty of tensioning force for a secure, rattle-free grasp of both mag bodies. Deep surface ribbing gives you a solid, non-slip purchase, while rounded outside edges resist snagging on clothes and other gear. Installs in seconds with a standard slot-head screwdriver; no permanent alterations to magazines. Models available to fit four popular 30-round magazines: Magpul PMAG and GEN M3 PMAG.
SPECS: Glass-reinforced nylon polymer, black, with steel hardware. PMAG Fits only Generation II PMAGs manufactured after July 2009 (see date stamp on mag body) with four exterior ribs and green follower. GEN M3 PMAG coupler fits only third generation Magpul PMAGs.
Mer...
Klemmer sammen to polymermagasiner for to ganger Brannkraften på fingertuppene
Slitesterk, korrosjons-, vær- og støtbestandig forsterket nylonkobling lar deg bære to 30-runde mags på våpenet ditt for supersnelle laster. Klemmer sikkerhetsmagasinet sikkert til det i pistolen for rask tilgang. Tverrbolt av stål gir rikelig med spennkraft for et sikkert, skrangelfri grep om begge magekroppene. Dyp overflatebånd gir deg et solid, sklisikkert kjøp, mens avrundede ytterkanter motstår å hage på klær og annet utstyr. Installeres på sekunder med en standard skrutrekker. ingen permanente endringer i magasiner. Modeller tilgjengelige for å passe til fire populære 30-runders magasiner: Magpul PMAG og GEN M3 PMAG.
SPECS: Glassforsterket nylonpolymer, svart, med stålvare. PMAG Passer bare Generation II PMAGs produsert etter juli 2009 (se datostempel på mag-kroppen) med fire utvendige ribber og grønn følger. GEN M3 PMAG-kobling passer bare til tredje generasjon Magpul PMAG.
Mer...
Kundevurderinger for Magpul PMAG Coupler
Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4
Doesn't Fit A P-Mag(03.06.2011)
Simple, doesn't fit a P-Mag.
Great product(03.06.2011)
Simple, effective, not a lot of bulk. Locks PMAGs together rock solid.
NO! It's A Good Thing I Only Bought One!(03.06.2011)
I'd rather wrestle a rabid bear then to have to put these things together for all the mags I have. Front half - back half, can't see between the mag to align the screw with the hole leading to the hexnut. Too many other couplers available to fight with one of these. Once you get it in place, you fear taking apart. I without question WOULD NOT reccomend this "thing" to any one.
good product(01.08.2011)
This product is built well. It is easy to use and put together. It allows reloads to be very quick. The price was very good for my budget. good bang for the buck.
Good lightweight product(07.09.2011)
Purchased over 70 of these for our Patrol Rifle Program for use with the MAGPUL P Mags. Unlike some other couplers which hold the bottom of the mags, these allow for proper offsetting to clear the ejection port cover. Did not have any problems with installation and they do not shift if dropped or during immediate action drills. If using with S&W magpul mags, you will have to match with other S&W mags. The ridges on the S&W mags supplied with our rifles were slightly different than the standard PMAGS which caused alignment issues. May interfere with the PMAG supplied covers when attaching to the bottom of the mag. Did what we wanted them to for a great price.
Fits my PMAGs Perfectly(14.10.2011)
Writer who said they don't fit PMAG,s was wrong, they fit 30 rounders perfectly. lightweight, look sexy, solid fit and will not shift one bit when they hit the ground (full or empty). [@]
Fits, but needs "encouragement"(09.11.2011)
After quickly sorting out which halves go where, I needed to "encourage" the halves onto the mags with a rubber mallet - the parts are stubborn to install. However, once the halves are seated, the "fingers" wrap around the mags wicked strong for a good fit. Line up the screw/nut and you are good to go. Plus, with this coupler, I can use my Lula Loader to feed the pmags, unlike another coupler I purchased.
Outstanding Magazine Coupler(05.02.2012)
Works perfectly with Magpul PMAGS (as described in the product description). Easy to install, just make sure the right side magazine is offset lower than the left magazine so it will clear the open dust cover on your AR-15/M-16. Once installed the mags are locked rock solid. Don't over tighten the screw, snug it down until there is no movement, then give the screw a quarter turn more.
Does What It Is Supposed To Do(27.02.2012)
I'm a casual shooter that wanted a coupler compatible with my 30 Round Windowed P-mags for the initial stages of a home defense scenario. I ordered these because they looked like they were made sturdy and the larger surface contact area would hold the mags together more effectively than a skinnier coupler. I picked a good product as this DreamPlastics coupler did what it was supposed to do. It does hold them very tightly together depending on how tight you make the screw down the middle. The coupler holds not only via the tension of the middle screw, but the insides of the front and rear clamps are molded so they fit around the external horizontal ribs of the P-Mags so they won't slide up or down. Thumbs up for that. Now, after saying all that, I have two Cons here: the weight and the nut recess. First off, the weight. It's a no brainer that if the device is bigger than comparable items, then it's going to be heavier. So, if you're already worried about the growing weight of you AR due to other accessories, this will stack on that. We're not talking 'fall out of your hands' heavy, but it IS heavier than other couplers I've held. The other Con: the nut recess. Assembly involves you fitting the P-Mags into the clamps, and putting a long screw from front to back. In the back, the manufacturer has made a six-sided nut recess where you drop the small nut that will hold onto the screw. It's about 1/4 - 1/5 inch deep and the nut refused to fit inside it when I got it. I ended up Dremmeling off the paint on all six sides of the nut and hand filing the recess just a minute amount. After that, I took my rubber mallet and my punch and firmly (yet gingerly) whacked the nut all the way into the recess. If you do this, pay attention not to let the punch go INTO the nut and mess up the threads. It went in easier the deeper it went so I think the molding process made the initial opening tighter than the rest. But, besides a nut that has the paint Dremmeled off it, it functions just how I would imagine it would. The physical labor I had to do for complete assembly is why it only gets 4 stars as a rating. I don't think I'm going to get another mag coupler of any kind as I just wanted this as the initial way to get 60 rounds closer to the rifle. If I did get another one, though, I would probably get this device.
Absolutely Solid(03.07.2012)
Very sturdy, quality material, wont shift, takes a beating. Does what I expect, looks good, easy to assemble. Bulkier than most others but not bad considering that I dont have to worry about anything coming loose.
100004970 Magpul PMAG Coupler Produsentnr.: MP1851988002223 Slitesterk, korrosjons-, vær- og støtbestandig forsterket nylonkobling lar deg bære to 30-runde mags på våpenet ditt for supersnelle laster. Klemmer sikkerhetsmagasinet sikkert til det i pistolen for rask tilgang. Tverrbolt av stål gir rikelig med spennkraft for et sikkert, skrangelfri grep om begge magekroppene. Dyp overflatebånd gir deg et solid, sklisikkert kjøp, mens avrundede ytterkanter motstår å hage på klær og annet utstyr. Installeres på sekunder med en standard skrutrekker. ingen permanente endringer i magasiner. Modeller tilgjengelige for å passe til fire populære 30-runders magasiner: Magpul PMAG og GEN M3 PMAG.
Clamps Together Two Polymer Magazines For Twice The Firepower At Your Fingertips
Durable, corrosion-, weather- and impact-resistant reinforced nylon coupler lets you carry two 30-round mags on your weapon for super-fast reloads. Securely clamps the backup magazine to the one in the gun for fast access. Steel cross-bolt provides plenty of tensioning force for a secure, rattle-free grasp of both mag bodies. Deep surface ribbing gives you a solid, non-slip purchase, while rounded outside edges resist snagging on clothes and other gear. Installs in seconds with a standard slot-head screwdriver; no permanent alterations to magazines. Models available to fit four popular 30-round magazines: Magpul PMAG and GEN M3 PMAG.
SPECS: Glass-reinforced nylon polymer, black, with steel hardware. PMAG Fits only Generation II PMAGs manufactured after July 2009 (see date stamp on mag body) with four exterior ribs and green follower. GEN M3 PMAG coupler fits only third generation Magpul PMAGs.
Mer...
Klemmer sammen to polymermagasiner for to ganger Brannkraften på fingertuppene
Slitesterk, korrosjons-, vær- og støtbestandig forsterket nylonkobling lar deg bære to 30-runde mags på våpenet ditt for supersnelle laster. Klemmer sikkerhetsmagasinet sikkert til det i pistolen for rask tilgang. Tverrbolt av stål gir rikelig med spennkraft for et sikkert, skrangelfri grep om begge magekroppene. Dyp overflatebånd gir deg et solid, sklisikkert kjøp, mens avrundede ytterkanter motstår å hage på klær og annet utstyr. Installeres på sekunder med en standard skrutrekker. ingen permanente endringer i magasiner. Modeller tilgjengelige for å passe til fire populære 30-runders magasiner: Magpul PMAG og GEN M3 PMAG.
SPECS: Glassforsterket nylonpolymer, svart, med stålvare. PMAG Passer bare Generation II PMAGs produsert etter juli 2009 (se datostempel på mag-kroppen) med fire utvendige ribber og grønn følger. GEN M3 PMAG-kobling passer bare til tredje generasjon Magpul PMAG.
Mer...
Kundevurderinger for Magpul PMAG Coupler
Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4
Doesn't Fit A P-Mag(03.06.2011)
Simple, doesn't fit a P-Mag.
Great product(03.06.2011)
Simple, effective, not a lot of bulk. Locks PMAGs together rock solid.
NO! It's A Good Thing I Only Bought One!(03.06.2011)
I'd rather wrestle a rabid bear then to have to put these things together for all the mags I have. Front half - back half, can't see between the mag to align the screw with the hole leading to the hexnut. Too many other couplers available to fight with one of these. Once you get it in place, you fear taking apart. I without question WOULD NOT reccomend this "thing" to any one.
good product(01.08.2011)
This product is built well. It is easy to use and put together. It allows reloads to be very quick. The price was very good for my budget. good bang for the buck.
Good lightweight product(07.09.2011)
Purchased over 70 of these for our Patrol Rifle Program for use with the MAGPUL P Mags. Unlike some other couplers which hold the bottom of the mags, these allow for proper offsetting to clear the ejection port cover. Did not have any problems with installation and they do not shift if dropped or during immediate action drills. If using with S&W magpul mags, you will have to match with other S&W mags. The ridges on the S&W mags supplied with our rifles were slightly different than the standard PMAGS which caused alignment issues. May interfere with the PMAG supplied covers when attaching to the bottom of the mag. Did what we wanted them to for a great price.
Fits my PMAGs Perfectly(14.10.2011)
Writer who said they don't fit PMAG,s was wrong, they fit 30 rounders perfectly. lightweight, look sexy, solid fit and will not shift one bit when they hit the ground (full or empty). [@]
Fits, but needs "encouragement"(09.11.2011)
After quickly sorting out which halves go where, I needed to "encourage" the halves onto the mags with a rubber mallet - the parts are stubborn to install. However, once the halves are seated, the "fingers" wrap around the mags wicked strong for a good fit. Line up the screw/nut and you are good to go. Plus, with this coupler, I can use my Lula Loader to feed the pmags, unlike another coupler I purchased.
Outstanding Magazine Coupler(05.02.2012)
Works perfectly with Magpul PMAGS (as described in the product description). Easy to install, just make sure the right side magazine is offset lower than the left magazine so it will clear the open dust cover on your AR-15/M-16. Once installed the mags are locked rock solid. Don't over tighten the screw, snug it down until there is no movement, then give the screw a quarter turn more.
Does What It Is Supposed To Do(27.02.2012)
I'm a casual shooter that wanted a coupler compatible with my 30 Round Windowed P-mags for the initial stages of a home defense scenario. I ordered these because they looked like they were made sturdy and the larger surface contact area would hold the mags together more effectively than a skinnier coupler. I picked a good product as this DreamPlastics coupler did what it was supposed to do. It does hold them very tightly together depending on how tight you make the screw down the middle. The coupler holds not only via the tension of the middle screw, but the insides of the front and rear clamps are molded so they fit around the external horizontal ribs of the P-Mags so they won't slide up or down. Thumbs up for that. Now, after saying all that, I have two Cons here: the weight and the nut recess. First off, the weight. It's a no brainer that if the device is bigger than comparable items, then it's going to be heavier. So, if you're already worried about the growing weight of you AR due to other accessories, this will stack on that. We're not talking 'fall out of your hands' heavy, but it IS heavier than other couplers I've held. The other Con: the nut recess. Assembly involves you fitting the P-Mags into the clamps, and putting a long screw from front to back. In the back, the manufacturer has made a six-sided nut recess where you drop the small nut that will hold onto the screw. It's about 1/4 - 1/5 inch deep and the nut refused to fit inside it when I got it. I ended up Dremmeling off the paint on all six sides of the nut and hand filing the recess just a minute amount. After that, I took my rubber mallet and my punch and firmly (yet gingerly) whacked the nut all the way into the recess. If you do this, pay attention not to let the punch go INTO the nut and mess up the threads. It went in easier the deeper it went so I think the molding process made the initial opening tighter than the rest. But, besides a nut that has the paint Dremmeled off it, it functions just how I would imagine it would. The physical labor I had to do for complete assembly is why it only gets 4 stars as a rating. I don't think I'm going to get another mag coupler of any kind as I just wanted this as the initial way to get 60 rounds closer to the rifle. If I did get another one, though, I would probably get this device.
Absolutely Solid(03.07.2012)
Very sturdy, quality material, wont shift, takes a beating. Does what I expect, looks good, easy to assemble. Bulkier than most others but not bad considering that I dont have to worry about anything coming loose.