Auto-oversatt beskrivelse (Beskrivelse - Produsent): Overdimensjonert sperre med aggressive takter for å gi en ultrasikker gripeflate når du lader våpenet eller rydder feil. Den høyprofilerte Tac-låsen er maskinert fra 7075 T6 aluminium til eksakte toleranser og med Mil S-8625 Type III klasse 2 hardlakk anodisert med et Teflon overflatebelegg for overlegen ytelse og problemfri drift. Mer...
Oversized latch with aggressive serrations to provide an ultra- secure gripping surface when charging the weapon or clearing malfunctions. High-profile Tac Latch is machined from 7075 T6 aluminum to exact tolerances and with Mil S-8625 Type III Class 2 hardcoat anodized with a Teflon surface coating for superior performance and trouble-free operation. Fits standard charging handles to improve handling.
SPECS: 7075 T6 aluminum, Type III hardcoat anodized, Teflon coated, matte black. Latch pad approximately 1” (2.5cm) wide, ½” (1.3cm) high.
Mer...
Overdimensjonert, sklisikker lås
Overdimensjonert sperre med aggressive takter for å gi en ultrasikker gripeflate når du lader våpenet eller rydder feil. Den høyprofilerte Tac-låsen er maskinert fra 7075 T6 aluminium til eksakte toleranser og med Mil S-8625 Type III klasse 2 hardlakk anodisert med et Teflon overflatebelegg for overlegen ytelse og problemfri drift. Passer standard ladehåndtak for å forbedre håndteringen.
SPECS: 7075 T6 aluminium, anodisert i hårfarge type III, teflonbelagt, matt sort. Lempepute omtrent 2,5 cm bred, 1,4 cm høy.
Mer...
Kundevurderinger for Milled Tac Latch
Antall vurderinger: 13
Fra brownells.com: 13
Gjennomsnittsvurdering: 4,1
Awesome Part!(05.11.2011)
While I religiously add extended charging latches, I had never used this specific one before. I used it on my most recent AR build and love it! It's big without getting in the way and with the notches, you get a very positive feel when you grab it or knife hand it. Great part and easy to install.
Great Addition!(26.12.2011)
I have used varying Tac-Latches on every build I have done/assisted with (going on 15) and this one is winning me over. I am a huge fan of BO tac-latches, but this on is tied for number one now. The deeply milled grooves allow for an awesome grip with/without gloves in any weather. You WILL NOT be sorry for this addition!
Now not so sure(19.05.2012)
I have purchased two of these. First one fit and functions perfectly on an Armalite upper - then bought another for use on a DPMS upper. The second one often hangs up a bit on the upper 'notch' - I suppose I could cut a relief in the charging handle or the rear of the latch itself to give it more room for swinging out and clear of the 'notch' - but instead will just put it in my box of spare parts.
Best of the bunch(18.06.2012)
I ordered a variety of tactical latches last year to see which one(s) worked best for me. The Black Rain is the hands down favorite. It is much less obtrusive than the others. Even though it is lower profile it still lets you get a firm grip but is big enough to quickly slap back to retract the bolt carrier. It feels very solid and well built. I don't have any fear of breaking this unit like I do some others. Any more tactical latch buys will be Black Rain.
Great upgrade for cheap(04.04.2013)
I am not into the huge latch look on my AR's, but I wanted something that would be easy to charge and didn't look ridiculous.
This thing is PERFECT, charges effortlessly, looks great, installs easily, and a quality piece of kit.
I am installing one on each of my AR's
Not A Happy Match With DPMS(24.01.2014)
This latch went onto a new DPMS charging handle without a hitch, BUT it does not open wide enough to be used with 7 different AR uppers I have. Seems Black Rain knows about this issue and says you only need to file the hook down enough to clear the side of the Upper in order for the latch to work.
Since Black Rain knows about this issue, they should stipulate that it may not work with other makes of charging handles without some work.
Since Black Rain know this problem, they should fix their latches to work with other makes of charging handles.
Money well spent(28.05.2014)
I fitted this to my NEA15 carbine, to get a little more clearance from my EoTech magnifier. It was literally a 2 minute job, fitting right in without any problems and working perfectly from the word go. I'm really satisfied with this product!
Decent, but misleading photos(14.11.2014)
Completely functional for its purpose, but the photos led me to believe that the ridged area was full-thickness. In fact, the side not shown in the photos is hollowed. While still fully functional, it simply isn't (in my opinion) very attractive compared to other latches -and I put enough money into my builds that aesthetics matters. It is actually not as long as the Brownell's Tactical Latch, which might be an issue when using a larger scope.
Works with .308 Sig716 AR-10(12.01.2015)
This is exactly what I wanted for my Sig716 and it replaces the stock item perfectly. It's 4 stars because there's a defect in the finish. It has a big white circle in the center that's about 3mm wide. It's cosmetic only.
File down to function(21.11.2015)
The latch does not open far enough to release from the notch on the upper. I had to file down the catch hook on the latch so that it would release. Other than that, it works fine. Instillation was easy enough, just had to do a little extra work. This was installed on a DPMS upper, may work fine with different uppers.
An update on my original review.....(24.06.2016)
While I still wish the top of the latch was a bit more "filled in" for appearance, I recently had an experience with this latch that caused me to order another one.... or two.
I've started building 7.62 NATO ARs, and had tried several latches I had on hand with both carbines and precision guns. They all seemed to cause the charging handle to pull at an angle, causing a slight bind. Made them feel like they were flexing.
For whatever reason, I put the Black Rain latch on a 16" carbine. Interestingly, the Black Rain gave a solid pull on the charging handle with no heavy friction or binding. What felt like a flexing charging handle before now felt much more solid and smooth. It didn't seem like much of a change in geometry, but it had a HUGE effect on how it felt when charging the rifle.
With the lighter 5.56 bolts, I never noticed a difference, but with that heavy 7.62 NATO bolt, the BR latch gives a noticeable change how it feels when charging the rifle. I didn't think I'd ever buy another one of these, but it's all I'm using on ANYTHING with a heavy bolt. And it's actually comfortable to use on heavy metal!
The best in class(04.05.2017)
A couple years ago I started using various latch extensions. Bought one of everything on the market. All worked but one rose to the top as best all around, Black Rain.
It has no sharp edges. The "grip" is far superior to other designs being comfortable on bare skin or thin gloves. Also its design makes it less prone to grabbing clothes or gear. Some designs are so thin they don't inspire confidence for durability, the BRO latch feels strong by comparison.
Its more compact than some designs but its usability is much better. Workmanship is A+, no fit issues. Works with zero problems in DPMS, Rock River, Aero and Colt uppers.
So after 2-3 years of trying different brands the Black Rain is my top choice and I'm in process of switching all my field use ARs to this latch.
Get This One!(18.09.2018)
Installed easily on a Daniel Defense upper. Great improvement over a thin blade type latch. Just the right size for small to medium optics. Deep milled forward face provides good non-slip surface. Rounded edges help prevent snagging. Bottom surface is basicaly flush with charging handle with increased surface area above the top of handle. Although I ordered another roll pin I followed previous reviewers recommendations to not totally remove the original roll pin which was a great help. I will buy more.
100007206 Milled Tac Latch Produsentnr.: BROMTL736211610195 Overdimensjonert sperre med aggressive takter for å gi en ultrasikker gripeflate når du lader våpenet eller rydder feil. Den høyprofilerte Tac-låsen er maskinert fra 7075 T6 aluminium til eksakte toleranser og med Mil S-8625 Type III klasse 2 hardlakk anodisert med et Teflon overflatebelegg for overlegen ytelse og problemfri drift. Passer standard ladehåndtak for å forbedre håndteringen.
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oversized latch with aggressive serrations to provide an ultra- secure gripping surface when charging the weapon or clearing malfunctions. High-profile Tac Latch is machined from 7075 T6 aluminum to exact tolerances and with Mil S-8625 Type III Class 2 hardcoat anodized with a Teflon surface coating for superior performance and trouble-free operation. Fits standard charging handles to improve handling.
SPECS: 7075 T6 aluminum, Type III hardcoat anodized, Teflon coated, matte black. Latch pad approximately 1” (2.5cm) wide, ½” (1.3cm) high.
Mer...
Overdimensjonert, sklisikker lås
Overdimensjonert sperre med aggressive takter for å gi en ultrasikker gripeflate når du lader våpenet eller rydder feil. Den høyprofilerte Tac-låsen er maskinert fra 7075 T6 aluminium til eksakte toleranser og med Mil S-8625 Type III klasse 2 hardlakk anodisert med et Teflon overflatebelegg for overlegen ytelse og problemfri drift. Passer standard ladehåndtak for å forbedre håndteringen.
SPECS: 7075 T6 aluminium, anodisert i hårfarge type III, teflonbelagt, matt sort. Lempepute omtrent 2,5 cm bred, 1,4 cm høy.
Mer...
Kundevurderinger for Milled Tac Latch
Antall vurderinger: 13
Fra brownells.com: 13
Gjennomsnittsvurdering: 4,1
Awesome Part!(05.11.2011)
While I religiously add extended charging latches, I had never used this specific one before. I used it on my most recent AR build and love it! It's big without getting in the way and with the notches, you get a very positive feel when you grab it or knife hand it. Great part and easy to install.
Great Addition!(26.12.2011)
I have used varying Tac-Latches on every build I have done/assisted with (going on 15) and this one is winning me over. I am a huge fan of BO tac-latches, but this on is tied for number one now. The deeply milled grooves allow for an awesome grip with/without gloves in any weather. You WILL NOT be sorry for this addition!
Now not so sure(19.05.2012)
I have purchased two of these. First one fit and functions perfectly on an Armalite upper - then bought another for use on a DPMS upper. The second one often hangs up a bit on the upper 'notch' - I suppose I could cut a relief in the charging handle or the rear of the latch itself to give it more room for swinging out and clear of the 'notch' - but instead will just put it in my box of spare parts.
Best of the bunch(18.06.2012)
I ordered a variety of tactical latches last year to see which one(s) worked best for me. The Black Rain is the hands down favorite. It is much less obtrusive than the others. Even though it is lower profile it still lets you get a firm grip but is big enough to quickly slap back to retract the bolt carrier. It feels very solid and well built. I don't have any fear of breaking this unit like I do some others. Any more tactical latch buys will be Black Rain.
Great upgrade for cheap(04.04.2013)
I am not into the huge latch look on my AR's, but I wanted something that would be easy to charge and didn't look ridiculous.
This thing is PERFECT, charges effortlessly, looks great, installs easily, and a quality piece of kit.
I am installing one on each of my AR's
Not A Happy Match With DPMS(24.01.2014)
This latch went onto a new DPMS charging handle without a hitch, BUT it does not open wide enough to be used with 7 different AR uppers I have. Seems Black Rain knows about this issue and says you only need to file the hook down enough to clear the side of the Upper in order for the latch to work.
Since Black Rain knows about this issue, they should stipulate that it may not work with other makes of charging handles without some work.
Since Black Rain know this problem, they should fix their latches to work with other makes of charging handles.
Money well spent(28.05.2014)
I fitted this to my NEA15 carbine, to get a little more clearance from my EoTech magnifier. It was literally a 2 minute job, fitting right in without any problems and working perfectly from the word go. I'm really satisfied with this product!
Decent, but misleading photos(14.11.2014)
Completely functional for its purpose, but the photos led me to believe that the ridged area was full-thickness. In fact, the side not shown in the photos is hollowed. While still fully functional, it simply isn't (in my opinion) very attractive compared to other latches -and I put enough money into my builds that aesthetics matters. It is actually not as long as the Brownell's Tactical Latch, which might be an issue when using a larger scope.
Works with .308 Sig716 AR-10(12.01.2015)
This is exactly what I wanted for my Sig716 and it replaces the stock item perfectly. It's 4 stars because there's a defect in the finish. It has a big white circle in the center that's about 3mm wide. It's cosmetic only.
File down to function(21.11.2015)
The latch does not open far enough to release from the notch on the upper. I had to file down the catch hook on the latch so that it would release. Other than that, it works fine. Instillation was easy enough, just had to do a little extra work. This was installed on a DPMS upper, may work fine with different uppers.
An update on my original review.....(24.06.2016)
While I still wish the top of the latch was a bit more "filled in" for appearance, I recently had an experience with this latch that caused me to order another one.... or two.
I've started building 7.62 NATO ARs, and had tried several latches I had on hand with both carbines and precision guns. They all seemed to cause the charging handle to pull at an angle, causing a slight bind. Made them feel like they were flexing.
For whatever reason, I put the Black Rain latch on a 16" carbine. Interestingly, the Black Rain gave a solid pull on the charging handle with no heavy friction or binding. What felt like a flexing charging handle before now felt much more solid and smooth. It didn't seem like much of a change in geometry, but it had a HUGE effect on how it felt when charging the rifle.
With the lighter 5.56 bolts, I never noticed a difference, but with that heavy 7.62 NATO bolt, the BR latch gives a noticeable change how it feels when charging the rifle. I didn't think I'd ever buy another one of these, but it's all I'm using on ANYTHING with a heavy bolt. And it's actually comfortable to use on heavy metal!
The best in class(04.05.2017)
A couple years ago I started using various latch extensions. Bought one of everything on the market. All worked but one rose to the top as best all around, Black Rain.
It has no sharp edges. The "grip" is far superior to other designs being comfortable on bare skin or thin gloves. Also its design makes it less prone to grabbing clothes or gear. Some designs are so thin they don't inspire confidence for durability, the BRO latch feels strong by comparison.
Its more compact than some designs but its usability is much better. Workmanship is A+, no fit issues. Works with zero problems in DPMS, Rock River, Aero and Colt uppers.
So after 2-3 years of trying different brands the Black Rain is my top choice and I'm in process of switching all my field use ARs to this latch.
Get This One!(18.09.2018)
Installed easily on a Daniel Defense upper. Great improvement over a thin blade type latch. Just the right size for small to medium optics. Deep milled forward face provides good non-slip surface. Rounded edges help prevent snagging. Bottom surface is basicaly flush with charging handle with increased surface area above the top of handle. Although I ordered another roll pin I followed previous reviewers recommendations to not totally remove the original roll pin which was a great help. I will buy more.