Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
julegavefrist-toppbanner

WILSON COMBAT AR-15/M16 ACCU-RIZER FLATTOP SCOPE MOUNT


Auto-oversatt beskrivelse (Beskrivelse - Produsent): Støttestativ i ett stykke med integrerte ringer gir ekstra heving fra toppen av skinnen til midtlinjen på ringen for å sikre en riktig kinnsveis. Presisjon maskinert fra aluminiumsstangmateriale for sikker passform på mottakerskinnen. Mer...

874218005764 965000104
For Quick Detach/Reattach Of Scope Without Loss Of Zero
One-piece riser mount with integral rings provides additional elevation from top of rail to centerline of ring to ensure a proper cheek weld. Precision machined from aluminum bar stock for a secure fit on flattop receiver rail. Scope and mount form a single unit for fast attachment and removal without loss of zero. Mounts by hand tightening the oversized thumb screw to clamp the locking plate. The captive, spring-loaded locking plate maintains a positive mechanical connection that resists loosening under shock and vibration. Four hardened Torx®-head screws clamp each ring cap to the lower half. Models available for scopes with 1" or 30mm diameter bodies. 1" and 30mm model’s forward cantilever lets the scope overhang the front of the receiver to ensure plenty of eye relief.

SPECS: Aluminum, hardcoat anodized, black. Approx. 5" (12.7cm) long, 17⁄8" (4.8cm) wide. Approx. 8 oz. (227g) weight. 1" - Height from top of base to inside bottom of ring: 1.2" (30.5mm). 30mm - Height from top of base to inside bottom of ring: 1" (2.5mm).

WILSON COMBAT
2401 2401 2 NOK
965000104
Accu-Rizer Scope Mount, 30mm
Produsentnr.: TRARMOUNT30 874218005764 Støttestativ i ett stykke med integrerte ringer gir ekstra heving fra toppen av skinnen til midtlinjen på ringen for å sikre en riktig kinnsveis. Presisjon maskinert fra aluminiumsstangmateriale for sikker passform på mottakerskinnen. Omfanget og monteringen danner en enkelt enhet for hurtig feste og fjerning uten tap av null. Festes for hånd til å stramme den store tommelskruen for å klemme låseplaten. Den fangede, fjærbelastede låseplaten opprettholder en positiv mekanisk forbindelse som motstår å løsne under støt og vibrasjoner. Fire herdede Torx®-skruer klemmer hver ringhette til den nedre halvdelen. Modeller som er tilgjengelige for omfang med karosserier på 1 "eller 30 mm i diameter. 1" og 30 mm modell fremover uttak, lar omfanget henge over fronten på mottakeren for å sikre mye øyelindring.
2401 NOK 0 kr 2 401,00 *

Utgått hos produsenten
Spesifikasjoner: Finish: Black Height: 1.090'' Number of Bases: 1-Piece Scope Tube Diameter: 30mm Size: High Style: Flat Top

Attributes

Finish: Black Height: 1.090'' Number of Bases: 1-Piece Scope Tube Diameter: 30mm Size: High Style: Flat Top

Elementdetaljer

Made in USA



965000087
Accu-Rizer Scope Mount, 1"
Produsentnr.: TRARMOUNT 874218005764 Accu-Rizer Scope Mount, 1 "
2401 NOK 1 kr 2 401,00 *

1 på lager
Spesifikasjoner: Finish: Black Height: 1'' Number of Bases: 1-Piece Scope Tube Diameter: 1'' Size: High Style: Tactical Rings

Beskrivelse

Accu-Rizer Scope Mount, 1 "

Attributes

Finish: Black Height: 1'' Number of Bases: 1-Piece Scope Tube Diameter: 1'' Size: High Style: Tactical Rings

Elementdetaljer

Made in USA


For Quick Detach/Reattach Of Scope Without Loss Of Zero
One-piece riser mount with integral rings provides additional elevation from top of rail to centerline of ring to ensure a proper cheek weld. Precision machined from aluminum bar stock for a secure fit on flattop receiver rail. Scope and mount form a single unit for fast attachment and removal without loss of zero. Mounts by hand tightening the oversized thumb screw to clamp the locking plate. The captive, spring-loaded locking plate maintains a positive mechanical connection that resists loosening under shock and vibration. Four hardened Torx®-head screws clamp each ring cap to the lower half. Models available for scopes with 1" or 30mm diameter bodies. 1" and 30mm model’s forward cantilever lets the scope overhang the front of the receiver to ensure plenty of eye relief.

SPECS: Aluminum, hardcoat anodized, black. Approx. 5" (12.7cm) long, 17⁄8" (4.8cm) wide. Approx. 8 oz. (227g) weight. 1" - Height from top of base to inside bottom of ring: 1.2" (30.5mm). 30mm - Height from top of base to inside bottom of ring: 1" (2.5mm).