Din handlekurv er tom.

Handlekurv

37 17 00 00

DPMS AR-15 Upper Receiver Block

AR-15 Upper Receiver Claw

Auto-oversatt beskrivelse (Beskrivelse - Produsent): Maskinert fra tøff, slitesterkt nylon for å holde den øvre mottakeren i en benkskrue uten frykt for å knuse, merke eller skrape finishen. Passer inni strippede eller tønne, bærehåndtak og platemottakere med svingstifter i diameter . Mer...

Produktnr.: 231000157 231000157

Secure Support For Receiver While Fitting Parts

Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers.

SPECS: Nylon, white. AR-15 - 7 (17.8cm) long, 1¾ (4.5cm) wide, 2-7⁄8" (7.3cm) high. DPMS .308 - 7-3⁄8" (18.7cm) long, 1-7⁄8" (4.8cm) wide, 3 (7.6cm) high. Fits DPMS Panther AR-style .308 receivers.

Mer...

Sikker støtte for mottaker mens du monterer deler

Maskinert fra tøff, slitesterkt nylon for å holde den øvre mottakeren i en benkskrue uten frykt for å knuse, merke eller skrape finishen. Passer inni strippede eller tønne, bærehåndtak og platemottakere med svingstifter i diameter .250 ". Holder mottakere i alle vinkler for rengjøring, eller montering av sikter og tilbehør. Modeller som passer til standard AR-15 og DPMS AR-stil .308 mottakere.

SPECS: Nylon, hvit. AR-15 - 7 (17,8 cm) lang, 1¾ (4,5 cm) bred, 2-7⁄8 "(7,3 cm) høy. DPMS .308 - 7-3⁄8" (18,7 cm) lang, 1-7⁄ 8 "(4,8 cm) bred, 3 (7,6 cm) høy. Passer til DPMS Panther AR-stil .308 mottakere.

Mer...

Kundevurderinger for AR-15 Upper Receiver Claw

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,3

Very handy tool (19.02.2012)

Have used this tool several times on my DPMS LR-308 and it works great. It is intuitive and gives you a solid mount in which to clamp in a bench vise. Well built and should last a long time. Worth the price.

Works very well with S&W M&P10 (30.10.2013)

As an owner of the very proprietary S&W M&P10 .308, I am always pleased when I can find compatible aftermarket product. This block does fit the M&P10 - I am happy! As a note, there is some confusion in the heading category for this product as it appears they are stating it is for an AR15 .308 (no such thing, maybe). The heading states "DPMS - AR-15/AR-STYLE .308 UPPER RECEIVER BLOCK". There are two completely different products here - one for the DPMS .308 and one for the AR15 5.56/.223 platform.

Works Great (07.12.2013)

Works great on my Remington R-25.

Very disappointed (12.04.2014)

The unit appears to well built for it's intended purpose. Workmanship appears to be very good.

A previous rater stated that this block fit his S&W AR-10. It WILL NOT FIT my just purchased AR-10. It was the final thing I needed to complete my custom build up. I am now scrambling to find another source for a compatible tool.

I don't know if I received an out of spec unit, or if S&W changed the dimensions within the upper receiver from older models. The shoulder of the block in the magazine area is .0020" too wide to enter the upper receiver. Bottom line is that I have had to suspend my build because the block will not fit my rifle as advertised.

I am returning it to Brownells since it us useless to me. This is causing a major delay to my work and will cost me additional money for the expense of returning it.

Works great (14.09.2010)

Worked great to get my stuck Colt barrel nut off. It doesn't flex like I thought it might.

Pretty good (21.02.2011)

It works really well for being nylon. I have no idea why Colt has a thing about putting barrel nuts on so tight and undoubtedly with a generous amount of lock tite. 'Put heat to it to soften the epoxy'...Well heat transfers and this doesn't hold up to that. If you have a stubborn barrel nut get a different vise block. If its as it should be, this works great.

Quality product (12.05.2012)

Works on my billet and forged uppers, where my clamp style upper receiver block only worked on the forged upper. I haven't torqued off any crusty barrels, but for installing barrels, this was the trick. I didn't give it 5 stars because I have not torqued off any crusty barrels and I'm guessing it will not take any heat transfer, but still a very good product.

Good for easy installs (03.06.2012)

Besides shaving the front of it my Dremel to fit other rails I have no complaints.

I have read that this has been used to remove barrel nuts, I honestly think that this product is not the ideal tool for such task.

I also have a colt rifle and I had no problems removing the barrel nut, the only difference is that I used the AR-15/M16 UPPER RECEIVER ACTION BLOCK, that made the job much easier since it held the receiver in the vise better.

I used this block to install my rail and sights, I also use it to clean my rifle and for any other minor work that would not involve heavy torquing of the barrel nut.

Les 8 flere anmeldelser fra brownells.com

667 1231 2 NOK

231000157
AR-15 Upper Receiver Claw
Produsentnr.: F620958 Maskinert fra tøff, slitesterkt nylon for å holde den øvre mottakeren i en benkskrue uten frykt for å knuse, merke eller skrape finishen. Passer inni strippede eller tønne, bærehåndtak og platemottakere med svingstifter i diameter .250 ". Holder mottakere i alle vinkler for rengjøring, eller montering av sikter og tilbehør. Modeller som passer til standard AR-15 og DPMS AR-stil .308 mottakere.

667 NOK 50 kr 667,00 *

10+ på lager

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: AR-15

Elementdetaljer

Made in USA

231000240
DPMS .308 Upper Receiver Block
Produsentnr.: F414637 Maskinert fra tøff, slitesterkt nylon for å holde den øvre mottakeren i en benkskrue uten frykt for å knuse, merke eller skrape finishen. Passer inni strippede eller tønne, bærehåndtak og platemottakere med svingstifter i diameter .250 ". Holder mottakere i alle vinkler for rengjøring, eller montering av sikter og tilbehør. Modeller som passer til standard AR-15 og DPMS AR-stil .308 mottakere.

1231 NOK 25 kr 1 231,00 *

10+ på lager

Spesifikasjoner: Make: AR .308

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Secure Support For Receiver While Fitting Parts

Mer...

Sikker støtte for mottaker mens du monterer deler

Mer...

Kundevurderinger for AR-15 Upper Receiver Claw

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,3

Very handy tool (19.02.2012)

Works very well with S&W M&P10 (30.10.2013)

Works Great (07.12.2013)

Works great on my Remington R-25.

Very disappointed (12.04.2014)

Works great (14.09.2010)

Worked great to get my stuck Colt barrel nut off. It doesn't flex like I thought it might.

Pretty good (21.02.2011)

Quality product (12.05.2012)

Good for easy installs (03.06.2012)

Les 8 flere anmeldelser fra brownells.com

Kunder kjøpte også
Alternativer

Sinclair AR-15 Vise Block
AR-15/AR-10™ AR VISE BLOCKS

SINCLAIR INTERNATIONAL

På lager 10+ på lager

kr 425,00 * kr 425,00 - kr 582,00*

Bench & Vise Blocks

2,8 (4)

Action Block & Lower Vise Block Set
AR-15/M16 LOWER RECEIVER VISE BLOCK

BROWNELLS

På lager 10+ på lager

kr 884,00 * kr 342,00 - kr 884,00*

Bench & Vise Blocks

3,6 (49)

50 BMG Case Gage
WILSON CASE GAGE

L.E. WILSON, INC.

På lager 4 på lager

kr 714,00 * kr 414,00 - kr 714,00*

Hylse måleverktøy

4,9 (14)

Blizzard Lens Cover #9 2.0-2.10" (50.8-53.3mm)
BLIZZARD SCOPE LENS COVERS

BUTLER CREEK

Dette produktet kan dessverre ikke bestilles.

Linsebeskyttere for kikkertsikter

1 (1)

Tuned Buffer Spring, Carbine
AR-15/M16/308 AR TUNED BUFFER SPRING

J P ENTERPRISES

På lager 10+ på lager

kr 417,00 * kr 417,00 - kr 483,00*

4,9 (11)

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.

Priser inkl. mva. pluss levering

Klassisk visning

Mobilvisning