Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
julegavefrist-toppbanner

OSPREY DEFENSE AR-15 GAS PISTON CONVERSION KIT


AR-15 Gas Piston Conversion Kit Carbine Black

Auto-oversatt beskrivelse (Beskrivelse - Produsent): Drop-in gassstempelkonverteringssett installeres på bare fem minutter og forbedrer påliteligheten og funksjonen til din AR-15 ved å eliminere begroing forårsaket av gassutlufting i mottakeren. Rifle kjører kjøligere, med sjeldnere behov for rengjøring og mindre slitasje på holder og bolt - noe som resulterer i lengre levetid fra disse kritiske delene. Mer...

Produktnr.: 100005291 837654804605 100005291
For Smoother, Cooler Operation, Reduced Recoil, & Less Frequent Cleaning
Drop-in gas piston conversion kit installs in only five minutes and improves the reliability and function of your AR-15 by eliminating fouling caused by gas venting into the receiver. Rifle runs cooler, with less frequent need for cleaning and less wear on carrier and bolt - resulting in longer service life from these critical parts. The unique, kidney-shaped cross-section of the piston and piston chamber provides extra mass and surface area to evenly spread out gas pressure and reduce felt recoil, allowing you to stay on target for rapid follow-up shots. Installs in minutes on both semi- or full-auto/burst rifles with a barrel O.D. of .875" or less. No need to remove gas block/sight tower, and no permanent alterations to barrel or upper receiver - reinstall original parts at any time. Replacement bolt carrier with integral lug is machined from a single piece of steel for a lifetime of use. Models available to fit Carbine and Rifle gas systems.

SPECS: Steel, black oxide finish. Handguard – Reinforced polymer composite, black. Kit includes preassembled piston assembly, bolt carrier, handguard, and instructions. Carbine fits 11½" to 16" barrels with .875" O.D. or smaller, and carbine-length gas system. Rifle fits 20" barrels with .875" or smaller O.D. and rifle-length gas system.

5590 5590 1 NOK
100005291
AR-15 Gas Piston Conversion Kit Carbine Black
Produsentnr.: OPS416 837654804605 Drop-in gassstempelkonverteringssett installeres på bare fem minutter og forbedrer påliteligheten og funksjonen til din AR-15 ved å eliminere begroing forårsaket av gassutlufting i mottakeren. Rifle kjører kjøligere, med sjeldnere behov for rengjøring og mindre slitasje på holder og bolt - noe som resulterer i lengre levetid fra disse kritiske delene. Det unike, nyreformede tverrsnittet av stempelet og stempelkammeret gir ekstra masse og overflate for å jevnt spre ut gasstrykk og redusere filtpåtrykk, slik at du kan holde deg i mål for raske oppfølgingsbilder. Installeres i løpet av minutter på både halv- eller hel-auto / burst rifler med en fat O.D. på .875 "eller mindre. Ingen grunn til å fjerne gassblokk / siktårn, og ingen permanente endringer på tønne eller øvre mottaker - installer originale deler når som helst. Utskiftningsboltbærer med integrert knast er maskinert fra et enkelt stålstykke for en levetid på bruk.Modeller tilgjengelig for å passe karbon- og rifle-gassystemer.
5590 NOK 0 kr 5 590,00 *

Kan restnoteres
Spesifikasjoner: Finish: Black Gas System Length: Carbine Make: AR-15

Attributes

Finish: Black Gas System Length: Carbine Make: AR-15

Elementdetaljer

Made in USA
US eksport klassifisering: I(h)



For Smoother, Cooler Operation, Reduced Recoil, & Less Frequent Cleaning
Drop-in gas piston conversion kit installs in only five minutes and improves the reliability and function of your AR-15 by eliminating fouling caused by gas venting into the receiver. Rifle runs cooler, with less frequent need for cleaning and less wear on carrier and bolt - resulting in longer service life from these critical parts. The unique, kidney-shaped cross-section of the piston and piston chamber provides extra mass and surface area to evenly spread out gas pressure and reduce felt recoil, allowing you to stay on target for rapid follow-up shots. Installs in minutes on both semi- or full-auto/burst rifles with a barrel O.D. of .875" or less. No need to remove gas block/sight tower, and no permanent alterations to barrel or upper receiver - reinstall original parts at any time. Replacement bolt carrier with integral lug is machined from a single piece of steel for a lifetime of use. Models available to fit Carbine and Rifle gas systems.

SPECS: Steel, black oxide finish. Handguard – Reinforced polymer composite, black. Kit includes preassembled piston assembly, bolt carrier, handguard, and instructions. Carbine fits 11½" to 16" barrels with .875" O.D. or smaller, and carbine-length gas system. Rifle fits 20" barrels with .875" or smaller O.D. and rifle-length gas system.