Auto-oversatt beskrivelse (Beskrivelse - Produsent): Valgspak av helt stål installeres som originalen og legger en spak til høyre side av pistolen for venstrehendte skyttere eller høyrehendte skyttere som skyter fra uortodokse stillinger. Høyres spak har en lav profil for å unngå å forstyrre avtrekksfingeren til høyrehendte skyttere og er beholdt med et sperring - ingen skruer eller pinner for å løse seg. Mer...
Lets You Control Safety From Either Side Of Your AR
All-steel selector lever installs like the original and adds a lever to the right side of the gun for left-handed shooters or right-handed shooters shooting from unorthodox positions. Right-side lever has a low profile to avoid interfering with the trigger finger of right-handed shooters and is retained with a detent - no screws or pins to work loose. Small and large lever can be reversed and used on either side. Made of tool steel to last a lifetime.
SPECS: Hardened tool steel, matte black oxide finish. Fits semi-auto AR-15s with mil-spec lower receiver.
Mer...
Lar deg kontrollere sikkerheten fra begge sider av din AR
Valgspak av helt stål installeres som originalen og legger en spak til høyre side av pistolen for venstrehendte skyttere eller høyrehendte skyttere som skyter fra uortodokse stillinger. Høyres spak har en lav profil for å unngå å forstyrre avtrekksfingeren til høyrehendte skyttere og er beholdt med et sperring - ingen skruer eller pinner for å løse seg. Liten og stor spak kan reverseres og brukes på hver side. Laget av verktøystål for å vare livet ut.
SPECS: Herdet verktøystål, matt svart oksidfinish. Passer semi-auto AR-15s med mil-spesifikke lavere mottaker.
Mer...
Kundevurderinger for AR-15 Ambidextrous Selector
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 3
would not buy(25.03.2012)
i bought this safty im a fan of troy ind they have great products but they fell short on this one there is too much play in safty when u install and use from right side it moves to left side and vise versa i think it is a little to long i have rock river and bush master ar15 same proplem with both its not the gun its the safty i have a lot of exp building ar15s it works but u dont have the click u would with a reg safty also the play is just annoying i will not use this in any future builds but i still love troy ind i will use other items from them just not this
great product(02.04.2012)
i made a mistake this product is great the proplem was troy sent it to me backwards the large side was supposed to be on other side once i figgured that out and fixed it there was no play and it clicked just like it was supposed to this is a well built product and plz disreguard other review troy makes great products they just put this one together backwards witch messed me up i will use this on future builds
Going to order another one(13.04.2012)
Solid design,easy to install, no fitting required Troy's customer support gets 5 stars. Always easy to contact,and there for you if there is an issue
GONE -- TROY Quality --beware(17.10.2013)
Beware. Troy quality assurance must have been laid off. I purchased 4 of these over time and they were great. Recently purchased 2 (mid-post panic) that were back-ordered. Brownells received & sent 10/2013 but only one was barely serviceable. The other literally fell apart in your hand. Nothing fit--it could never pass a post production QA review. Junk. Returned to Brownells for a replacement that was even worse. Sent back--won't buy again. No slight on Brownells, their guarantee is fine--this is all TROYS problem.
I don't know what is happening to Troy Industries, but from my point of view, their recent lack of production standards has really dragged their brand name down. Unless Troy decides to buck up and soon; they cannot attempt to command the prices for their items because the quality, craftsmanship and attention to detail is not there.
Very good selector, fits standard lowers(06.02.2014)
Installed on an LMT lower for my daughter who is ambidextrous and likes to shoot left handed as much as right handed (trying to get her to stick with one side).
This selector is made from really solid material and clicks perfectly into place. The feel is so much better than the stock selector. No wobble or looseness. No screws to come loose.
Why four stars and not five? This selector fits standard lowers like the forged LMT lower, but I tried it first on a Noveske Gen 2 lower which is NOT standard and it wouldn't fit. Why? The side walls of the Noveske are just very slightly wider and so the Troy selector would not slide into place.
I'm guessing that this fine selector would fit on at least 95% of the lowers out there.
Poor Design - Not Suitable for LEO Use(04.12.2017)
I purchased this for my personally owned law enforcement duty rifle. Returned this item after it literally fell apart during training. I finished a course of fire and moved off the line when one of the Range Officers approached me holding a part that the next guy shooting on my station had found. He was holding the strong side safety lever which I realized had sheared out of the safety selector on my rifle. The Troy safety lever relies on a small dovetail in the main body (on both sides) which the safety levers slide into, each secured by detents on the main body. The dovetails on both sides are TINY; not strong enough to hold up to real use. From what I can tell I probabaly dragged the safety lever against my plate carrier during a transition to handgun at the end of the shooting stage, which ripped the safety lever from the dovetail. The metal at the edge of the dovetail is too thin, and showed evidence of deformation. The only positive experience here was Brownells no hassle warranty. Returned it for a full refund. ***Do not buy this safety if you plan to actually use your rifle.***
100008880 AR-15 Ambidextrous Selector Produsentnr.: SSDTAMBS0BT00812441026811 Valgspak av helt stål installeres som originalen og legger en spak til høyre side av pistolen for venstrehendte skyttere eller høyrehendte skyttere som skyter fra uortodokse stillinger. Høyres spak har en lav profil for å unngå å forstyrre avtrekksfingeren til høyrehendte skyttere og er beholdt med et sperring - ingen skruer eller pinner for å løse seg. Liten og stor spak kan reverseres og brukes på hver side. Laget av verktøystål for å vare livet ut.
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Lets You Control Safety From Either Side Of Your AR
All-steel selector lever installs like the original and adds a lever to the right side of the gun for left-handed shooters or right-handed shooters shooting from unorthodox positions. Right-side lever has a low profile to avoid interfering with the trigger finger of right-handed shooters and is retained with a detent - no screws or pins to work loose. Small and large lever can be reversed and used on either side. Made of tool steel to last a lifetime.
SPECS: Hardened tool steel, matte black oxide finish. Fits semi-auto AR-15s with mil-spec lower receiver.
Mer...
Lar deg kontrollere sikkerheten fra begge sider av din AR
Valgspak av helt stål installeres som originalen og legger en spak til høyre side av pistolen for venstrehendte skyttere eller høyrehendte skyttere som skyter fra uortodokse stillinger. Høyres spak har en lav profil for å unngå å forstyrre avtrekksfingeren til høyrehendte skyttere og er beholdt med et sperring - ingen skruer eller pinner for å løse seg. Liten og stor spak kan reverseres og brukes på hver side. Laget av verktøystål for å vare livet ut.
SPECS: Herdet verktøystål, matt svart oksidfinish. Passer semi-auto AR-15s med mil-spesifikke lavere mottaker.
Mer...
Kundevurderinger for AR-15 Ambidextrous Selector
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 3
would not buy(25.03.2012)
i bought this safty im a fan of troy ind they have great products but they fell short on this one there is too much play in safty when u install and use from right side it moves to left side and vise versa i think it is a little to long i have rock river and bush master ar15 same proplem with both its not the gun its the safty i have a lot of exp building ar15s it works but u dont have the click u would with a reg safty also the play is just annoying i will not use this in any future builds but i still love troy ind i will use other items from them just not this
great product(02.04.2012)
i made a mistake this product is great the proplem was troy sent it to me backwards the large side was supposed to be on other side once i figgured that out and fixed it there was no play and it clicked just like it was supposed to this is a well built product and plz disreguard other review troy makes great products they just put this one together backwards witch messed me up i will use this on future builds
Going to order another one(13.04.2012)
Solid design,easy to install, no fitting required Troy's customer support gets 5 stars. Always easy to contact,and there for you if there is an issue
GONE -- TROY Quality --beware(17.10.2013)
Beware. Troy quality assurance must have been laid off. I purchased 4 of these over time and they were great. Recently purchased 2 (mid-post panic) that were back-ordered. Brownells received & sent 10/2013 but only one was barely serviceable. The other literally fell apart in your hand. Nothing fit--it could never pass a post production QA review. Junk. Returned to Brownells for a replacement that was even worse. Sent back--won't buy again. No slight on Brownells, their guarantee is fine--this is all TROYS problem.
I don't know what is happening to Troy Industries, but from my point of view, their recent lack of production standards has really dragged their brand name down. Unless Troy decides to buck up and soon; they cannot attempt to command the prices for their items because the quality, craftsmanship and attention to detail is not there.
Very good selector, fits standard lowers(06.02.2014)
Installed on an LMT lower for my daughter who is ambidextrous and likes to shoot left handed as much as right handed (trying to get her to stick with one side).
This selector is made from really solid material and clicks perfectly into place. The feel is so much better than the stock selector. No wobble or looseness. No screws to come loose.
Why four stars and not five? This selector fits standard lowers like the forged LMT lower, but I tried it first on a Noveske Gen 2 lower which is NOT standard and it wouldn't fit. Why? The side walls of the Noveske are just very slightly wider and so the Troy selector would not slide into place.
I'm guessing that this fine selector would fit on at least 95% of the lowers out there.
Poor Design - Not Suitable for LEO Use(04.12.2017)
I purchased this for my personally owned law enforcement duty rifle. Returned this item after it literally fell apart during training. I finished a course of fire and moved off the line when one of the Range Officers approached me holding a part that the next guy shooting on my station had found. He was holding the strong side safety lever which I realized had sheared out of the safety selector on my rifle. The Troy safety lever relies on a small dovetail in the main body (on both sides) which the safety levers slide into, each secured by detents on the main body. The dovetails on both sides are TINY; not strong enough to hold up to real use. From what I can tell I probabaly dragged the safety lever against my plate carrier during a transition to handgun at the end of the shooting stage, which ripped the safety lever from the dovetail. The metal at the edge of the dovetail is too thin, and showed evidence of deformation. The only positive experience here was Brownells no hassle warranty. Returned it for a full refund. ***Do not buy this safety if you plan to actually use your rifle.***