Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS ALUMA-HYDE® II


Auto-oversatt beskrivelse (Beskrivelse - Produsent): Det spesielle ved Aluma-Hyde II (og årsaken til utviklingen) er dens økte motstand mot borerengjøringsmidler, løsemidler og andre rengjøringskjemikalier, til og med trikloretylen. Dagens familie med raske, aggressive borerengjøringsmidler gjør virkelig en kjempejobb med å få skitne pistolhull glitrende rene, men de kan skape særlig ødeleggelse med alle andre overflater de kommer i kontakt med. Mer...

050806113497 083002618
Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents
The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Parkerizing Gray (medium dark), Stainless Steel Gray (light), Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown), Wolf Grey (medium/light grey) and the original favorite, Matte Black. Also available is Semi-Gloss Black which can be used to compliment the matte finishes or give you a black finish that is less matte if you desire. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around “truck” guns and, of course, anodized parts. Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma-Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.

Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product.

SPECS: 12 oz. (340 g) aerosol can.

0 0 1 NOK
New
083002618
BROWNELLS 12 oz Matte Wolf Gray Aerosol
Produsentnr.: 1A29SR90618 050806113497 Det spesielle ved Aluma-Hyde II (og årsaken til utviklingen) er dens økte motstand mot borerengjøringsmidler, løsemidler og andre rengjøringskjemikalier, til og med trikloretylen. Dagens familie med raske, aggressive borerengjøringsmidler gjør virkelig en kjempejobb med å få skitne pistolhull glitrende rene, men de kan skape særlig ødeleggelse med alle andre overflater de kommer i kontakt med. Etter fullstendig herding viste Aluma-Hyde II seg løsemiddelsikre for alle, bortsett fra de mest aggressive, kobberfjernende hullløsningsmidlene. Aluma-Hyde II er formulert med en herdende epoksybase som inneholder ekstra pigment med høy tetthet for en holdbar finish som fester seg til alle godt forberedte aluminiums- og legeringsoverflater, stål og plast-det er flott på syntetiske lagre. Aluma-Hyde II er tilgjengelig i en rekke farger for å hjelpe våpensmeden til å matche det store antallet applikasjoner som finnes i den gjennomsnittlige pistolhandelen. Matt finish er tilgjengelig i Parkerizing Grey (mellomgrå), Dark Parkerizing Grey (middels mørk), Rustfritt stål grå (lys), Earth Brown, Matte Clear, O.D. Grønn for å lage kamomønstre, Desert Tan (lys, ørkenbrun sand), Coyote (lys, gråbrun), Wolf Grey (middels/lys grå) og den opprinnelige favoritten, Matte Black. Halvblank svart er også tilgjengelig, som kan brukes til å komplimentere de matte finishene eller gi deg en svart finish som er mindre matt hvis du ønsker det. Vi liker den Matte Black-fargen for refinering av de brukte AR-15-rumpene og håndvernene du plukker opp når du bygger en delepistol, "truck" -pistoler og selvfølgelig anodiserte deler. Aluma-Hyde II tørker ved berøring på bare minutter og når full kur på omtrent en uke. Slik bruker vi den: Varm delen og Aluma-Hyde II til omtrent 90? F .; bruk et par minutter på å riste dagslysene ut av Aluma-Hyde II og påfør et medium strøk for god dekning. Du kan male på nytt på noen få minutter, men ikke vent mer enn tretti minutter. Når Aluma-Hyde II begynner å herde, må du vente til den er helt herdet for å male på nytt.Du kan kutte herdetiden til omtrent to dager ved å sirkulere varm luft (90? F. fungerer fint) forbi delen. Absolutt ingen primer er nødvendig for en tøff, holdbar, slitesterk, rustbestandig finish som blander seg vakkert og komplimenterer alle applikasjoner for etterbehandling av pistoler.

Kan ikke bestilles
Spesifikasjoner: Farge: Wolf Grey

Attributes

Farge: Wolf Grey

Elementdetaljer

Made in USA



Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents
The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Parkerizing Gray (medium dark), Stainless Steel Gray (light), Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown), Wolf Grey (medium/light grey) and the original favorite, Matte Black. Also available is Semi-Gloss Black which can be used to compliment the matte finishes or give you a black finish that is less matte if you desire. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around “truck” guns and, of course, anodized parts. Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma-Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.

Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product.

SPECS: 12 oz. (340 g) aerosol can.

Nyhetsbrev