Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

AK BUILDER AK-74 5.45x39 RECEIVER FLAT


AK-74 Fixed Stock Flat

Auto-oversatt beskrivelse (Beskrivelse - Produsent): AK-74 5.45x39 - For standard, fast aksel AK-74. Brukes med bulgarsk og den vanligste varianten 5.45x 39mm sett. 1⁄8 "justeringsnålhull er forhåndsboret. Mer...

Produktnr.: 100006760 ]C1100006760 100006760
Precision Stamped Steel Ready To Bend & Build
AK-74 5.45x39 – For standard, fixed-stock AK-74. Use with Bulgarian and the most common variant 5.45x 39mm kits. 1⁄8" alignment pin holes are pre-drilled.Precision-cut, ready-to-bend steel flats save time and frustration when building a custom AK. No more trying to salvage a beat-up receiver from a “donor” gun. These flats are stamped from the correct 1mm thick sheet steel, with top rails pre-bent, stepped, and trimmed on CNC equipment. Hammer and trigger holes are slightly undersized, ready for precise final reaming after bending; use 7mm and 5mm chucking reamers. All flats come with lower bolt guide rails that include magazine stabilizers on both rails and the hammer spacing bump that centers the hammer in the correct position. Rails require drilling for center support holes after spot welding. Refer to the listing below and choose the correct flat for your project.See the AK Builder Receiver Flat Bending Die Set, plus other jigs and tools that aid in custom AK work here.

SPECS: Annealed 4130 steel, in-the-white. 1mm (.040”) thick. Includes instructions.

443 443 1 NOK
100006760
AK-74 Fixed Stock Flat
Produsentnr.: 1587602822 ]C1100006760 AK-74 5.45x39 - For standard, fast aksel AK-74. Brukes med bulgarsk og den vanligste varianten 5.45x 39mm sett. 1⁄8 "justeringsnålhull er forhåndsboret. Presisjonskuttede, klare til bøyning av stålleiligheter sparer tid og frustrasjon når du bygger en tilpasset AK. Ikke mer å prøve å berge en beat-up mottaker fra en" giver "pistol. Disse leilighetene er stemplet fra riktig 1 mm tykt stålplate, med toppskinner forhåndsbøyd, tråkket og trimmet på CNC-utstyr. Hammer og avtrekkingshull er svakt underdimensjonerte, klare for presis endelig skruing etter bøying; bruk 7mm og 5mm chucking reamers. Alle leilighetene har føringsskinner med lavere bolt som inkluderer magasinstabilisatorer på begge skinnene og hammeravstandens støt som sentrerer hammeren i riktig posisjon. Skinner krever boring for senterstøttehull etter punktsveising. Se listen nedenfor og velg riktig flat for prosjektet ditt. Se AK Builder Receiver Flat Bending Die Set, pluss andre pilker og verktøy som hjelper til med tilpasset AK-arbeid her.
443 NOK 0 kr 443,00 *

Kan restnoteres
Spesifikasjoner: Action Type: Flat Cartridge: 5.45 x 39 mm Finish: Steel Make: AK-47, Russian Model: AK-74

Attributes

Action Type: Flat Cartridge: 5.45 x 39 mm Finish: Steel Make: AK-47,Russian Model: AK-74

Elementdetaljer

Made in USA
US eksport klassifisering: I(g)



Precision Stamped Steel Ready To Bend & Build
AK-74 5.45x39 – For standard, fixed-stock AK-74. Use with Bulgarian and the most common variant 5.45x 39mm kits. 1⁄8" alignment pin holes are pre-drilled.Precision-cut, ready-to-bend steel flats save time and frustration when building a custom AK. No more trying to salvage a beat-up receiver from a “donor” gun. These flats are stamped from the correct 1mm thick sheet steel, with top rails pre-bent, stepped, and trimmed on CNC equipment. Hammer and trigger holes are slightly undersized, ready for precise final reaming after bending; use 7mm and 5mm chucking reamers. All flats come with lower bolt guide rails that include magazine stabilizers on both rails and the hammer spacing bump that centers the hammer in the correct position. Rails require drilling for center support holes after spot welding. Refer to the listing below and choose the correct flat for your project.See the AK Builder Receiver Flat Bending Die Set, plus other jigs and tools that aid in custom AK work here.

SPECS: Annealed 4130 steel, in-the-white. 1mm (.040”) thick. Includes instructions.