Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

fri frakt juli

AMERICAN DEFENSE MANUFACTURING AIMPOINT HIGH PROFILE MOUNT


Auto-oversatt beskrivelse (Beskrivelse - Produsent): Hurtiglås spaken-lock systemet klemmer solid til flattop skinnen og fungerer ikke løse selv under tung rekyl-mer kraft opptrer på spaken, strammere det låses. Trykke ned i hempen å svinge spaken åpen, og mount heiser lett av rifla. Mer...

818503010125 100003651
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. High positions the backup sight picture in the lower 1/3 of the optic viewing area.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body.  High – 1.120” high.

AMERICAN DEFENSE MANUFACTURING
2345 2345 1 NOK
100003651
Aimpoint High Profile Mount
Produsentnr.: AD68HSTD 818503010125 Hurtiglås spaken-lock systemet klemmer solid til flattop skinnen og fungerer ikke løse selv under tung rekyl-mer kraft opptrer på spaken, strammere det låses. Trykke ned i hempen å svinge spaken åpen, og mount heiser lett av rifla. Justerbar med en flat skrutrekker eller selv en mynt for en svært sikker, nei-skli plass på nesten alle Picatinny eller Weaver stil jernbane, inkludert over - eller under-størrelse kommersielle skinner. Spaken kan konfigureres for å låse foran eller bak tilpasset operatørens preferanse. Stor låsing bar på siden av fjellet engasjerer maksimale rail området, mens crossbolt og to integrert låsing lugs sikrer bunnsolid engasjement jernbane spor å hindre bevegelse under rekyl. Fem heavy duty stål hex skruene (tre på topp, to på bunnen) klemme den loddrett delt ring halvdelene sammen. Utsparinger i ringen sidene og bunnen redusere vekten uten å ofre styrke. AD-68 Aimpoint Mount er konstruert for Aimpoint optisk eller lignende sikter enheter som krever en enkelt, 30mm ring, inkludert Comp C3 og M2/ML2/M3/ML3 serien. Tilgjengelig i fire konfigurasjoner som passer til en rekke montering behov. Høy posisjoner backup skue bildet i den nederste 1/3 av optisk visningsområdet.
2345 NOK 0 kr 2 345,00 *

Kan restnoteres
Spesifikasjoner: Color: Matte Black Finish: Black Fits / Used For: Aimpoint Micro Height: 1.120'' Make: AR-15 Number of Bases: 1-Piece Scope Tube Diameter: 30mm Size: High Style: High Profile

Attributes

Color: Matte Black Finish: Black Fits / Used For: Aimpoint Micro Height: 1.120'' Make: AR-15 Number of Bases: 1-Piece Scope Tube Diameter: 30mm Size: High Style: High Profile

Elementdetaljer

Made in USA





Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. High positions the backup sight picture in the lower 1/3 of the optic viewing area.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body.  High – 1.120” high.