Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

fri frakt juli

J P ENTERPRISES 308 AR LOW MASS BOLT CARRIERS


Auto-oversatt beskrivelse (Beskrivelse - Produsent): Redusert vekt bolten/carrier montering hjelper tamme følt rekyl på en JP eller DPMS Remington AR-stil 308 rifle (LR-308 mønster bare). Transportøren har samme type vekt-reduserende kutt funnet på originale JPBC-3 AR-15 bolt carrier å gi de samme fordelene din 308. Bredt bærer skinnene har ekstra bærer overflate for å forbedre bolt justering og redusere slitasje. Mer...

812872020594 452000157
Reduced-weight bolt/carrier assembly helps tame felt recoil on a JP or DPMS or Remington AR-style .308 rifle (LR-308 pattern only). Carrier features the same type of weight-reducing cuts found on the original JPBC-3 AR-15 bolt carrier to give the same benefits your .308. Wide carrier rails have extra bearing surface to improve bolt alignment and reduce wear. Carrier key is already installed and staked. Available with QPQ or polished stainless finish. See SPECS for the Compatibility Notice.

SPECS: JP Low Mass Operating System Bolt Carrier- Large-Frame (.308). Stainless Steel. Polished Finish. Requires DPMS-pattern bolt, firing pin and cam pin. Weight: 10.82 oz. with key installed.

JP Low Mass Operating System Bolt Carrier- Large-Frame (.308). Stainless Steel. QPQ Black Finish. Requires DPMS-pattern bolt, firing pin and cam pin. Weight: 10.82 oz. with key installed. Finish: QPQ Coating.

Compatibility-

This notice pertains to any rifle based on the large-format AR-10-type or LR-308 platform typically chambered in .308 Winchester, 7.62x51 NATO or other cartridges requiring the longer magazine format.

Be aware that these receiver platforms are not standardized like the AR-15/M16 platform for which most parts are cross-compatible. Before ordering accessories and parts for your large-format rifle, make sure the parts are compatible with your particular platform. This bolt carrier is compatible only with the DPMS family of AR-10 products.

With the Armalite/Rock River family of large-frame receivers, this carrier can only be used as a complete bolt carrier assembly group with a DPMS-pattern bolt such as our .308 JP EnhancedBolt. Interchanging individual components will result in an unsafe configuration. Do Not under any circumstances mix and match components between the platforms.

 

J P ENTERPRISES
4542 4542 2 NOK
452000157
JP .308 Low Mass Special Polish Stainless Carrier with key
Produsentnr.: JPBC4SP 812872020594 Redusert vekt bolten/carrier montering hjelper tamme følt rekyl på en JP eller DPMS Remington AR-stil 308 rifle (LR-308 mønster bare). Transportøren har samme type vekt-reduserende kutt funnet på originale JPBC-3 AR-15 bolt carrier å gi de samme fordelene din 308. Bredt bærer skinnene har ekstra bærer overflate for å forbedre bolt justering og redusere slitasje. Carrier tasten er allerede installert og staket. Tilgjengelig med QPQ eller polert rustfritt ferdig. Se spesifikasjoner for kompatibilitet.
4542 NOK 7 kr 4 542,00 *

7 på lager
Spesifikasjoner: Cartridge: 308 Winchester Finish: Stainless Steel Make: AR .308

Attributes

Cartridge: 308 Winchester Finish: Stainless Steel Make: AR .308

Elementdetaljer

Made in USA





452000172
JP .308 Low Mass Bolt Carrier with QPQ
Produsentnr.: JPBC4 812872020587 Redusert vekt bolten/carrier montering hjelper tamme følt rekyl på en JP eller DPMS Remington AR-stil 308 rifle (LR-308 mønster bare). Transportøren har samme type vekt-reduserende kutt funnet på originale JPBC-3 AR-15 bolt carrier å gi de samme fordelene din 308. Bredt bærer skinnene har ekstra bærer overflate for å forbedre bolt justering og redusere slitasje. Carrier tasten er allerede installert og staket. Tilgjengelig med QPQ eller polert rustfritt ferdig. Se spesifikasjoner for kompatibilitet.
4542 NOK 8 kr 4 542,00 *

8 på lager
Spesifikasjoner: Cartridge: 308 Winchester Finish: CPQ Coating Make: AR .308

Attributes

Cartridge: 308 Winchester Finish: CPQ Coating Make: AR .308

Elementdetaljer

Made in USA


Reduced-weight bolt/carrier assembly helps tame felt recoil on a JP or DPMS or Remington AR-style .308 rifle (LR-308 pattern only). Carrier features the same type of weight-reducing cuts found on the original JPBC-3 AR-15 bolt carrier to give the same benefits your .308. Wide carrier rails have extra bearing surface to improve bolt alignment and reduce wear. Carrier key is already installed and staked. Available with QPQ or polished stainless finish. See SPECS for the Compatibility Notice.

SPECS: JP Low Mass Operating System Bolt Carrier- Large-Frame (.308). Stainless Steel. Polished Finish. Requires DPMS-pattern bolt, firing pin and cam pin. Weight: 10.82 oz. with key installed.

JP Low Mass Operating System Bolt Carrier- Large-Frame (.308). Stainless Steel. QPQ Black Finish. Requires DPMS-pattern bolt, firing pin and cam pin. Weight: 10.82 oz. with key installed. Finish: QPQ Coating.

Compatibility-

This notice pertains to any rifle based on the large-format AR-10-type or LR-308 platform typically chambered in .308 Winchester, 7.62x51 NATO or other cartridges requiring the longer magazine format.

Be aware that these receiver platforms are not standardized like the AR-15/M16 platform for which most parts are cross-compatible. Before ordering accessories and parts for your large-format rifle, make sure the parts are compatible with your particular platform. This bolt carrier is compatible only with the DPMS family of AR-10 products.

With the Armalite/Rock River family of large-frame receivers, this carrier can only be used as a complete bolt carrier assembly group with a DPMS-pattern bolt such as our .308 JP EnhancedBolt. Interchanging individual components will result in an unsafe configuration. Do Not under any circumstances mix and match components between the platforms.