Attributes
- Antall: 6
- Leveringsvekt: 0,023kg
- Frakthøyde: 43mm
- Fraktbredde: 89mm
- Fraktlengde: 173mm
- UPC: 723189000561
Produktnr.: 155000211
Produsentnr.: 56
723189000561 Snap caps er flotte for tørrtrening fordi de lar deg fokusere på å holde våpenet stabilt under avtrekket, noe som hjelper med å eliminere flinch når du bruker levende ammunisjon. Solide aluminium Rimfire snap caps beskytter sluttstykket og vil vare i hundrevis av "skudd".Leveringstid ca. 14-21 dager.
Snap caps er utmerket for tørrskyting fordi de lar deg fokusere på å holde våpenet stabilt under avtrekket, noe som hjelper med å eliminere flinch når du bruker live ammo. Solid aluminium Rimfire snap caps beskytter kammeret og vil vare i hundrevis av "skudd".
BOO! 20.02.2015
I am a a gunsmith. I don't want holes in my walls (or me) when I work on 22's. I bought these SPECIFICALLY for action proving, feeding, dry fire. The FIRST time I used them was great, cycled through the feeding tube, ejected (yay, I fixed it). The SECOND time, no go. (Here is where you learn from my experience). Feeding issues. They "disappeared". They were stuck in the feeding tube and the spring wouldn't push them past the little bump inside. Oh, old, weak spring, stretched it little, nope. Well, this guy never cleaned his gun, maybe it is gunked up, disassembled the entire feeding mechanism, cleaned, lightly buffed appropriate areas, nope. They are getting stuck near the elbow of the feeding tube. Checked the set screw to be sure it wasn't protruding, nope. Is the elbow bent or damaged, nope... couple hours after starting this quest I discovered that the dummy rounds rims were deformed just enough (from the dry fire that they were bought for) that they no longer would go through the elbow... tried several new live rounds and viola, they flew through like the had somewhere to be... GRR!
Works as expected 22.01.2013
Since you can't spring-load a rimfire snap cap, these work just fine. Yes, the firing pin leaves a dent, turn the cap a bit and try again until the rim is fully dented. I believe it is still effective even though the rim of the cap is fully dented. The point is to prevent denting the barrel edge and these do that just fine.
Of course, you can also use a fired .22 case for the same effect. It's just harder to chamber.
Vi opplevde en feil under innlasting av dette innholdet. Vennligst last inn siden på nytt for å fortsette. Hvis problemet vedvarer, ta kontakt med kundeservice.